[Sun Jun 9 22:08:03 2013] Detection parameters: Position = (206.6, 384.3) = 6 41 13.72 9 55 44.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 199.9 +/- 19.4 Background counts = 35.8 Rate = 0.006 +/- 0.0005 [Sun Jun 9 22:08:07 2013] Off-axis axis estimate = 9.11' [Sun Jun 9 22:09:18 2013] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 22:09:18 2013] Initial guess for spatial extent in simple fitting = 10.99" [Sun Jun 9 22:09:18 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.983 [Sun Jun 9 22:09:18 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 10.99" [Sun Jun 9 22:09:20 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src54.ximg exists [Sun Jun 9 22:09:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src54.csv [Sun Jun 9 22:09:20 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src54_1.ximg exists [Sun Jun 9 22:09:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src54.csv [Sun Jun 9 22:09:20 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src54_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:09:21 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists [Sun Jun 9 22:09:21 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists [Sun Jun 9 22:09:21 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly [Sun Jun 9 22:09:55 2013] Source 56 is offset by 8.476413 and -2.581622 pixels which is larger than 2 X fitted extent = 1.233908 x 1.233908, not incorporating fit results [Sun Jun 9 22:09:55 2013] Warning, spatial fit 54 centroid is now closest to src. 7 [Sun Jun 9 22:09:55 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 22:09:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 22:09:55 2013] Assessing source extent using major [Sun Jun 9 22:09:55 2013] Source does appear to be extended [Sun Jun 9 22:09:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 22:10:58 2013] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 22:10:58 2013] Initial guess for spatial extent in simple fitting = 10.99" [Sun Jun 9 22:10:58 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.983 [Sun Jun 9 22:10:58 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 10.99" [Sun Jun 9 22:10:59 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src53.ximg exists [Sun Jun 9 22:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src53.csv [Sun Jun 9 22:10:59 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src53_1.ximg exists [Sun Jun 9 22:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src53.csv [Sun Jun 9 22:10:59 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src53_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:11:01 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists [Sun Jun 9 22:11:01 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists [Sun Jun 9 22:11:01 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly [Sun Jun 9 22:11:32 2013] Source 56 is offset by -6.901013 and 1.783481 pixels which is larger than 2 X fitted extent = 0.563269 x 0.563269, not incorporating fit results [Sun Jun 9 22:11:32 2013] Spatial fit model total counts = 986.680000, observed total counts = 901.000000 [Sun Jun 9 22:11:32 2013] Offset between fit and detection position for source 56 = 8.866530 pixels [Sun Jun 9 22:11:32 2013] 953.033000 total counts/ 447.125000 bgd. counts: snr = 23.925282 Spatial fit parameters: Offset between fit and detection position for source 56 = 8.866530 pixels Position = (200.9, 391.0) = 6 41 15.42 9 56 12.6 Extent = 22.0 (21.9-43.9)", rotation angle = 0 Source counts = 505.9 +/- 30.9 Background counts = 447.1 Rate = 0.01 +/- 0.0009 [Sun Jun 9 22:11:32 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 22:11:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 22:11:32 2013] Assessing source extent using major axis lower bound [Sun Jun 9 22:11:32 2013] Source does appear to be extended [Sun Jun 9 22:11:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 22:12:44 2013] XMMSAS src. selection expression = ellipse(17426.986000, 33972.812000, 1318.278038, 1318.278038, 0.000000, X, Y) [Sun Jun 9 22:12:44 2013] Not overwriting source region fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src56_src.reg [Sun Jun 9 22:12:44 2013] Extracting stamp from image fullrun_pn_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (125, 315) - (277, 467) [Sun Jun 9 22:12:44 2013] XMMSAS bgd. selection expression = annulus(17426.986000, 33972.812000, 2197.130063, 4394.260126, X, Y) && !ellipse(22404.529000, 30998.604540, 1296.187237, 1296.187237, 0.000000, X, Y) && !ellipse(18126.009600, 32718.554000, 392.036811, 392.036811, 0.000000, X, Y) && !ellipse(21444.448029, 29875.830750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20943.986954, 39209.870331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21961.719138, 37106.375600, 502.331214, 502.331214, 0.000000, X, Y) && !ellipse(20867.257935, 36286.860962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19247.628998, 33887.925171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20478.123566, 30396.617401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18256.078000, 29675.599600, 564.410416, 564.410416, 0.000000, X, Y) && !ellipse(12543.649490, 39018.819733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22133.416620, 38228.141600, 585.273617, 585.273617, 0.000000, X, Y) && !ellipse(19866.828293, 36738.444275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22411.192600, 33253.354000, 932.344027, 932.344027, 0.000000, X, Y) && !ellipse(20179.609329, 31583.577454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21174.046570, 31121.982025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20773.771698, 30496.467743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18063.540359, 28819.880463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22077.595520, 36312.354553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22124.706360, 35959.647186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22272.065796, 33774.157166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21510.552200, 33504.128800, 452.577613, 452.577613, 0.000000, X, Y) && !ellipse(16884.893204, 31966.910583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19274.764725, 30073.991516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17132.875595, 29850.804443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20325.620010, 29874.747498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22576.101166, 29627.683746, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 9 22:12:44 2013] Writing fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src56.gif [Sun Jun 9 22:18:44 2013] Mean detx,y = (-8935.41, -6821.95) [Sun Jun 9 22:18:47 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 22:19:22 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 22:19:23 2013] Setting source spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src56_src_b10.pi.gz [Sun Jun 9 22:19:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src56_bgd.pi.gz [Mon Jun 10 07:18:44 2013] Updating aperture counts using extracted products [Mon Jun 10 07:18:44 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 1143.00 [Mon Jun 10 07:18:44 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src56_bgd.pi.gz = 4734.00 [Mon Jun 10 07:18:44 2013] Got source and background scale factors 5283558.000000, 29571315.000000 [Mon Jun 10 07:18:44 2013] User source parameters: Position = (200.9, 391.0) = 6 41 15.42 9 56 12.6 Extent = 22.0 (21.9-43.9)", rotation angle = 0 Source aperture counts = 297.2 +/- 34.8 Background aperture counts = 845.8 Rate = 0.008 +/- 0.001 [Mon Jun 10 07:19:09 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 10 07:19:09 2013] Using photon index=1.80, rate=0.0143, arf fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src56.arf [Mon Jun 10 07:19:09 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 10 07:19:09 2013] Updating source flux to 1.4e-13 [Mon Jun 10 07:20:47 2013] Flag b found in src. 56 procflags, skipping spectral fitting [Mon Jun 10 07:21:23 2013] xmm0011420101/analysis//spectral/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete