[Sun Jun 9 22:08:02 2013] Detection parameters: Position = (254.2, 330.5) = 6 40 59.72 9 51 49.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 772.3 +/- 34.8 Background counts = 43.1 Rate = 0.03 +/- 0.001 [Sun Jun 9 22:08:07 2013] Off-axis axis estimate = 3.96' [Sun Jun 9 22:09:18 2013] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 22:09:18 2013] Initial guess for spatial extent in simple fitting = 8.41" [Sun Jun 9 22:09:18 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.056 [Sun Jun 9 22:09:18 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 8.41" [Sun Jun 9 22:09:19 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src28.ximg exists [Sun Jun 9 22:09:19 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src28_1.ximg exists [Sun Jun 9 22:09:19 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src28 appears to have run properly [Sun Jun 9 22:09:21 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists [Sun Jun 9 22:09:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src28.csv [Sun Jun 9 22:09:21 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists [Sun Jun 9 22:09:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src28.csv [Sun Jun 9 22:09:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:09:55 2013] Source 29 is offset by 9.343309 and -0.141456 pixels which is larger than 2 X fitted extent = 1.148202 x 1.148202, not incorporating fit results [Sun Jun 9 22:09:55 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 22:09:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 22:09:55 2013] Assessing source extent using major [Sun Jun 9 22:09:55 2013] Source does appear to be extended [Sun Jun 9 22:09:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 22:09:55 2013] Source is confused with source 28 [Sun Jun 9 22:10:58 2013] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 22:10:58 2013] Initial guess for spatial extent in simple fitting = 8.41" [Sun Jun 9 22:10:58 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.056 [Sun Jun 9 22:10:58 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 8.41" [Sun Jun 9 22:10:59 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src27.ximg exists [Sun Jun 9 22:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src27.csv [Sun Jun 9 22:10:59 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src27_1.ximg exists [Sun Jun 9 22:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src27.csv [Sun Jun 9 22:10:59 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src27_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:11:01 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists [Sun Jun 9 22:11:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src27.csv [Sun Jun 9 22:11:01 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists [Sun Jun 9 22:11:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src27.csv [Sun Jun 9 22:11:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:11:32 2013] Warning, spatial fit 27 centroid is now closest to src. 120 [Sun Jun 9 22:11:32 2013] Source 29 is offset by 9.103332 and 0.796565 pixels which is larger than 2 X fitted extent = 2.405871 x 2.405871, not incorporating fit results [Sun Jun 9 22:11:32 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 22:11:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 22:11:32 2013] Assessing source extent using major [Sun Jun 9 22:11:32 2013] Source does appear to be extended [Sun Jun 9 22:11:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 22:12:43 2013] XMMSAS src. selection expression = ellipse(22063.219864, 28702.459137, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 22:12:43 2013] Not overwriting source region fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_src.reg [Sun Jun 9 22:12:43 2013] Extracting stamp from image fullrun_pn_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (217, 293) - (292, 368) [Sun Jun 9 22:12:43 2013] XMMSAS bgd. selection expression = annulus(22063.219864, 28702.459137, 1087.500000, 2175.000000, X, Y) && !ellipse(22404.529000, 30998.604540, 1296.187237, 1296.187237, 0.000000, X, Y) && !ellipse(23058.796112, 31517.390228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21444.448029, 29875.830750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21358.180000, 28749.448000, 294.852008, 294.852008, 0.000000, X, Y) && !ellipse(20478.123566, 30396.617401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22004.512000, 29253.120000, 277.362408, 277.362408, 0.000000, X, Y) && !ellipse(20179.609329, 31583.577454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21174.046570, 31121.982025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20773.771698, 30496.467743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23290.030579, 27925.358612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21769.436890, 27910.726746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23439.070648, 27526.960846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20554.335660, 27404.587400, 373.140811, 373.140811, 0.000000, X, Y) && !ellipse(25063.988403, 30072.871094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19274.764725, 30073.991516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20325.620010, 29874.747498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22576.101166, 29627.683746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24983.716248, 29445.750519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23308.812256, 29195.346741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22580.107605, 27902.878479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20641.378662, 27800.712952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.599091, 27673.584839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21218.070938, 27770.557129, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 9 22:12:43 2013] Writing fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29.gif [Sun Jun 9 22:12:52 2013] ../../xmm0011420101/products/events/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0011420101/products/events/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create [Sun Jun 9 22:12:52 2013] Mean detx,y = (-4846.38, -1644.23) [Sun Jun 9 22:12:52 2013] ../../xmm0011420101/products/images/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_src.img and ../../xmm0011420101/products/images/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create [Sun Jun 9 22:12:52 2013] ../../xmm0011420101/products/spectra/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0011420101/products/spectra/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create [Sun Jun 9 22:12:52 2013] Setting source spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Sun Jun 9 22:12:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_bgd.pi.gz [Sun Jun 9 22:12:52 2013] ../../xmm0011420101/products/lightcurves/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0011420101/products/lightcurves/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create [Mon Jun 10 00:01:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 10 00:01:21 2013] rmf not generated due to insufficient counts [Mon Jun 10 07:18:38 2013] Updating aperture counts using extracted products [Mon Jun 10 07:18:38 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 1864.00 [Mon Jun 10 07:18:38 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 1830.00 [Mon Jun 10 07:18:38 2013] Got source and background scale factors 1106248.000000, 1303524.000000 [Mon Jun 10 07:18:38 2013] User source parameters: Position = (254.2, 330.5) = 6 40 59.72 9 51 49.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 311.0 +/- 44.2 Background aperture counts = 1553.0 Rate = 0.009 +/- 0.001 [Mon Jun 10 07:18:38 2013] Updating counts from extracted products [Mon Jun 10 07:18:38 2013] Set source signif. to 310.95/39.41 = 7.89 [Mon Jun 10 07:19:08 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 10 07:19:08 2013] Using photon index=1.80, rate=0.00879, arf fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29.arf [Mon Jun 10 07:19:08 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 10 07:19:08 2013] Updating source flux to 6.4e-14 [Mon Jun 10 07:20:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 10 07:21:23 2013] xmm0011420101/analysis//spectral/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete