[Sun Jun  9 22:08:02 2013] Detection parameters:
  Position = (210.4, 341.9) = 6 41 12.62 9 52 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 765.1 +/- 35.1
  Background counts = 37.6
  Rate = 0.02 +/- 0.001

[Sun Jun  9 22:08:07 2013] Off-axis axis estimate = 7.12'
[Sun Jun  9 22:09:18 2013] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:18 2013] Initial guess for spatial extent in simple fitting = 9.99"
[Sun Jun  9 22:09:18 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.959
[Sun Jun  9 22:09:18 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 9.99"
[Sun Jun  9 22:09:19 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src26.ximg exists
[Sun Jun  9 22:09:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src26.csv
[Sun Jun  9 22:09:19 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Jun  9 22:09:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src26.csv
[Sun Jun  9 22:09:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:21 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Jun  9 22:09:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun Jun  9 22:09:21 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Jun  9 22:09:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun Jun  9 22:09:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:55 2013] Warning, spatial fit 26 centroid is now closest to src. 118
[Sun Jun  9 22:09:55 2013] Source 27 is offset by -0.033459 and 2.248049 pixels which is larger than
2 X fitted extent = 2.002207 x 2.002207, not incorporating fit results
[Sun Jun  9 22:09:55 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:09:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:09:55 2013] Assessing source extent using major
[Sun Jun  9 22:09:55 2013] Source does appear to be extended
[Sun Jun  9 22:09:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:58 2013] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:10:58 2013] Initial guess for spatial extent in simple fitting = 9.99"
[Sun Jun  9 22:10:58 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.959
[Sun Jun  9 22:10:58 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.99"
[Sun Jun  9 22:10:59 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src25.ximg exists
[Sun Jun  9 22:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src25.csv
[Sun Jun  9 22:10:59 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Jun  9 22:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src25.csv
[Sun Jun  9 22:10:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:01 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Jun  9 22:11:01 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Jun  9 22:11:01 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Jun  9 22:11:32 2013] Spatial fit model total counts = 1183.680000, observed total counts = 1126.000000
[Sun Jun  9 22:11:32 2013] Offset between fit and detection position for source 27 = 0.264092 pixels
[Sun Jun  9 22:11:32 2013] 1184.903000 total counts/ 596.085000 bgd. counts: snr = 24.117205
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.264092 pixels
  Position = (210.4, 341.7) = 6 41 12.61 9 52 37.7
  Extent = 7.1 (6.6-7.7)", rotation angle = 0
  Source counts = 588.8 +/- 34.4
  Background counts = 596.1
  Rate = 0.02 +/- 0.001
[Sun Jun  9 22:11:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:32 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:32 2013] Source does appear to be extended
[Sun Jun  9 22:11:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:12:43 2013] XMMSAS src. selection expression = ellipse(18256.078000, 29675.599600, 423.307812, 423.307812, 0.000000, X, Y)
[Sun Jun  9 22:12:43 2013] Not overwriting source region fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_src.reg
[Sun Jun  9 22:12:43 2013] Extracting stamp from image fullrun_pn_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (186, 317) - (235, 366)
[Sun Jun  9 22:12:43 2013] XMMSAS bgd. selection expression = annulus(18256.078000, 29675.599600, 705.513020, 1411.026041, X, Y) && !ellipse(20478.123566, 30396.617401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20179.609329, 31583.577454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18063.540359, 28819.880463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19274.764725, 30073.991516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17132.875595, 29850.804443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20325.620010, 29874.747498, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 22:12:43 2013] Writing fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27.gif
[Sun Jun  9 22:12:51 2013] ../../xmm0011420101/products/events/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0011420101/products/events/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Sun Jun  9 22:12:52 2013] Mean detx,y = (-8499.63, -2697.71) 
[Sun Jun  9 22:12:52 2013] ../../xmm0011420101/products/images/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_src.img and ../../xmm0011420101/products/images/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Sun Jun  9 22:12:52 2013] ../../xmm0011420101/products/spectra/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0011420101/products/spectra/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Sun Jun  9 22:12:52 2013] Setting source spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jun  9 22:12:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sun Jun  9 22:12:52 2013] ../../xmm0011420101/products/lightcurves/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0011420101/products/lightcurves/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Mon Jun 10 07:18:38 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:18:38 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 752.00
[Mon Jun 10 07:18:38 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 182.00
[Mon Jun 10 07:18:38 2013] Got source and background scale factors 564800.000000, 871609.000000
[Mon Jun 10 07:18:38 2013] User source parameters:
  Position = (210.4, 341.7) = 6 41 12.61 9 52 37.7
  Extent = 7.1 (6.6-7.7)", rotation angle = 0
  Source aperture counts = 634.1 +/- 28.4
  Background aperture counts = 117.9
  Rate = 0.02 +/- 0.0008

[Mon Jun 10 07:19:07 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:07 2013] Using photon index=1.80, rate=0.0166, arf fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27.arf
[Mon Jun 10 07:19:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:07 2013] Updating source flux to 1.7e-13
[Mon Jun 10 07:20:47 2013] Flag b found in src. 27 procflags, skipping spectral fitting
[Mon Jun 10 07:21:23 2013] xmm0011420101/analysis//spectral/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete