[Sun Jun  9 22:08:05 2013] Detection parameters:
  Position = (247.7, 385.8) = 6 41 1.63 9 55 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.8 +/- 15.3
  Background counts = 39.3
  Rate = 0.004 +/- 0.0008

[Sun Jun  9 22:08:07 2013] Off-axis axis estimate = 7.33'
[Sun Jun  9 22:09:18 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:18 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Sun Jun  9 22:09:18 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.132
[Sun Jun  9 22:09:18 2013] Giving source the simple spatial ID 100 for pass 0, mean size = 10.09"
[Sun Jun  9 22:09:20 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src100.ximg exists
[Sun Jun  9 22:09:20 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src100_1.ximg exists
[Sun Jun  9 22:09:20 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src100 appears to have run properly
[Sun Jun  9 22:09:22 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Sun Jun  9 22:09:22 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Sun Jun  9 22:09:22 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src100 appears to have run properly
[Sun Jun  9 22:09:55 2013] Spatial fit model total counts = 656.999000, observed total counts = 657.000000
[Sun Jun  9 22:09:55 2013] Offset between fit and detection position for source 106 = 0.198460 pixels
[Sun Jun  9 22:09:55 2013] 533.100600 total counts/ 467.756000 bgd. counts: snr = 3.021343
Spatial fit parameters:
  Offset between fit and detection position for source 106 = 0.198460 pixels
  Position = (247.8, 385.7) = 6 41 1.60 9 55 49.2
  Extent = 5.7 (4.0-8.5)", rotation angle = 0
  Source counts = 65.3 +/- 23.1
  Background counts = 467.8
  Rate = 0.002 +/- 0.0007
[Sun Jun  9 22:09:55 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:09:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:09:55 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:09:55 2013] Source does appear to be extended
[Sun Jun  9 22:09:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:10:58 2013] Initial guess for spatial extent in simple fitting = 5.66"
[Sun Jun  9 22:10:58 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.925
[Sun Jun  9 22:10:58 2013] Giving source the simple spatial ID 96 for pass 1, mean size = 5.66"
[Sun Jun  9 22:11:00 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src96.ximg exists
[Sun Jun  9 22:11:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src96.csv
[Sun Jun  9 22:11:00 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src96_1.ximg exists
[Sun Jun  9 22:11:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src96.csv
[Sun Jun  9 22:11:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:03 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src96.ximg exists
[Sun Jun  9 22:11:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src96.csv
[Sun Jun  9 22:11:03 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src96_1.ximg exists
[Sun Jun  9 22:11:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src96.csv
[Sun Jun  9 22:11:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:32 2013] Warning, spatial fit 96 centroid is now closest to src. 105
[Sun Jun  9 22:11:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:32 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:32 2013] Source does appear to be extended
[Sun Jun  9 22:11:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:12:46 2013] XMMSAS src. selection expression = ellipse(21510.552200, 33504.128800, 339.433210, 339.433210, 0.000000, X, Y)
[Sun Jun  9 22:12:46 2013] Not overwriting source region fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src106_src.reg
[Sun Jun  9 22:12:46 2013] Extracting stamp from image fullrun_pn_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (228, 366) - (267, 405)
[Sun Jun  9 22:12:46 2013] XMMSAS bgd. selection expression = annulus(21510.552200, 33504.128800, 565.722016, 1131.444033, X, Y) && !ellipse(23058.796112, 31517.390228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22209.045023, 32902.180748, 368.231303, 293.606872, 114.855897, X, Y) && !ellipse(22660.650000, 34301.474000, 353.573610, 353.573610, 0.000000, X, Y) && !ellipse(22411.192600, 33253.354000, 932.344027, 932.344027, 0.000000, X, Y) && !ellipse(20179.609329, 31583.577454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22272.065796, 33774.157166, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 22:12:46 2013] Writing fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src106.gif
[Sun Jun  9 22:48:10 2013] Mean detx,y = (-5034.35, -6336.77) 
[Sun Jun  9 22:48:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 22:48:23 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 22:48:23 2013] Setting source spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src106_src_b10.pi.gz
[Sun Jun  9 22:48:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src106_bgd.pi.gz
[Mon Jun 10 01:21:15 2013] Not generating rmf since there are only 65 counts
[Mon Jun 10 01:21:15 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:18:53 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:18:53 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src106_src_b10.pi.gz = 154.00
[Mon Jun 10 07:18:53 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src106_bgd.pi.gz = 353.00
[Mon Jun 10 07:18:53 2013] Got source and background scale factors 361600.000000, 1533992.000000
[Mon Jun 10 07:18:53 2013] User source parameters:
  Position = (247.8, 385.7) = 6 41 1.60 9 55 49.2
  Extent = 5.7 (4.0-8.5)", rotation angle = 0
  Source aperture counts = 70.8 +/- 13.4
  Background aperture counts = 83.2
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 07:19:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:10 2013] Using photon index=1.80, rate=0.00185, arf fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src106.arf
[Mon Jun 10 07:19:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:10 2013] Updating source flux to 1.8e-14
[Mon Jun 10 07:20:47 2013] Source 106 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:21:23 2013] xmm0011420101/analysis//spectral/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src106_pl.csv not found, spectral fit skipped or did not complete