[Sun Jun  9 22:08:01 2013] Detection parameters:
  Position = (247.0, 344.0) = 6 41 1.82 9 52 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1281.5 +/- 45.5
  Background counts = 42.2
  Rate = 0.05 +/- 0.002

[Sun Jun  9 22:08:07 2013] Off-axis axis estimate = 4.98'
[Sun Jun  9 22:09:18 2013] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:18 2013] Initial guess for spatial extent in simple fitting = 8.92"
[Sun Jun  9 22:09:18 2013] source mask rpix=2.0, npix_max = 26, mask sum = 36, frac = 1.384
[Sun Jun  9 22:09:18 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 8.92"
[Sun Jun  9 22:09:19 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun  9 22:09:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src9.csv
[Sun Jun  9 22:09:19 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun  9 22:09:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src9.csv
[Sun Jun  9 22:09:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:21 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun  9 22:09:21 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun  9 22:09:21 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Jun  9 22:09:55 2013] Source 10 is offset by 2.493633 and 5.406078 pixels which is larger than
2 X fitted extent = 0.943968 x 0.943968, not incorporating fit results
[Sun Jun  9 22:09:55 2013] Warning, spatial fit 9 centroid is now closest to src. 3
[Sun Jun  9 22:09:55 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:09:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:09:55 2013] Assessing source extent using major
[Sun Jun  9 22:09:55 2013] Source does appear to be extended
[Sun Jun  9 22:09:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:58 2013] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:10:58 2013] Initial guess for spatial extent in simple fitting = 8.92"
[Sun Jun  9 22:10:58 2013] source mask rpix=2.0, npix_max = 26, mask sum = 36, frac = 1.384
[Sun Jun  9 22:10:58 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 8.92"
[Sun Jun  9 22:10:59 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src8.ximg exists
[Sun Jun  9 22:10:59 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Jun  9 22:10:59 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_src8 appears to have run properly
[Sun Jun  9 22:11:00 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Jun  9 22:11:00 2013] fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jun  9 22:11:00 2013] Fit fullrun_pn_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Jun  9 22:11:32 2013] Warning, spatial fit 8 centroid is now closest to src. 28
[Sun Jun  9 22:11:32 2013] Source 10 is offset by 2.434460 and 1.178813 pixels which is larger than
2 X fitted extent = 1.076368 x 1.076368, not incorporating fit results
[Sun Jun  9 22:11:32 2013] Source 10 is offset by -4.783563 and -7.213233 pixels which is larger than
2 X fitted extent = 0.978621 x 0.978621, not incorporating fit results
[Sun Jun  9 22:11:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:32 2013] Assessing source extent using major
[Sun Jun  9 22:11:32 2013] Source does appear to be extended
[Sun Jun  9 22:11:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:12:42 2013] Counts = 1281.477051, rescaling region sizes by 2.000000
[Sun Jun  9 22:12:42 2013] XMMSAS src. selection expression = ellipse(21444.448029, 29875.830750, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun  9 22:12:42 2013] Not overwriting source region fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun  9 22:12:42 2013] Extracting stamp from image fullrun_pn_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (172, 269) - (322, 419)
[Sun Jun  9 22:12:42 2013] XMMSAS bgd. selection expression = annulus(21444.448029, 29875.830750, 4350.000000, 8700.000000, X, Y) && !ellipse(26124.544300, 25657.361600, 419.108812, 419.108812, 0.000000, X, Y) && !ellipse(22404.529000, 30998.604540, 1296.187237, 1296.187237, 0.000000, X, Y) && !ellipse(26970.555600, 21750.891600, 444.580813, 444.580813, 0.000000, X, Y) && !ellipse(23058.796112, 31517.390228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18126.009600, 32718.554000, 392.036811, 392.036811, 0.000000, X, Y) && !ellipse(28678.064728, 32476.827545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27601.293701, 30048.128876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21358.180000, 28749.448000, 294.852008, 294.852008, 0.000000, X, Y) && !ellipse(21508.275220, 24555.894000, 430.128012, 430.128012, 0.000000, X, Y) && !ellipse(28770.752000, 23442.819600, 687.908820, 687.908820, 0.000000, X, Y) && !ellipse(22209.045023, 32902.180748, 368.231303, 293.606872, 114.855897, X, Y) && !ellipse(21593.182770, 39274.870758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20943.986954, 39209.870331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21961.719138, 37106.375600, 502.331214, 502.331214, 0.000000, X, Y) && !ellipse(20867.257935, 36286.860962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26511.696228, 35799.185181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22660.650000, 34301.474000, 353.573610, 353.573610, 0.000000, X, Y) && !ellipse(19247.628998, 33887.925171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20478.123566, 30396.617401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18256.078000, 29675.599600, 564.410416, 564.410416, 0.000000, X, Y) && !ellipse(22004.512000, 29253.120000, 277.362408, 277.362408, 0.000000, X, Y) && !ellipse(22063.219864, 28702.459137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26931.506840, 27700.770800, 425.183212, 393.176811, 349.465200, X, Y) && !ellipse(27791.966774, 27548.560600, 516.912815, 516.912815, 0.000000, X, Y) && !ellipse(20801.371400, 25488.936400, 427.189612, 352.216010, 97.949470, X, Y) && !ellipse(25787.311310, 25119.029816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12630.957474, 24757.305969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26563.748400, 24367.307000, 387.761611, 357.678410, 10.441200, X, Y) && !ellipse(20016.713989, 23451.169617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28384.485480, 23236.559800, 370.251211, 370.251211, 0.000000, X, Y) && !ellipse(17428.979065, 22497.039703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15807.919025, 21208.059099, 875.712394, 673.989086, 352.553602, X, Y) && !ellipse(25810.884000, 20895.302000, 1333.456038, 1333.456038, -0.000000, X, Y) && !ellipse(24095.335480, 20400.887436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12543.649490, 39018.819733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22133.416620, 38228.141600, 585.273617, 585.273617, 0.000000, X, Y) && !ellipse(19866.828293, 36738.444275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28421.989807, 35820.531616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24911.450966, 35003.499565, 458.786756, 351.168949, 359.997672, X, Y) && !ellipse(24719.100098, 33598.763275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22411.192600, 33253.354000, 932.344027, 932.344027, 0.000000, X, Y) && !ellipse(17426.986000, 33972.812000, 1757.704051, 1757.704051, 0.000000, X, Y) && !ellipse(24796.791565, 32429.889282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27521.751678, 31598.421722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20179.609329, 31583.577454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21174.046570, 31121.982025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25517.140320, 30895.483600, 358.713610, 358.713610, 0.000000, X, Y) && !ellipse(20773.771698, 30496.467743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18063.540359, 28819.880463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23290.030579, 27925.358612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21769.436890, 27910.726746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23439.070648, 27526.960846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28949.977400, 27420.892400, 403.840812, 403.840812, 0.000000, X, Y) && !ellipse(20554.335660, 27404.587400, 373.140811, 373.140811, 0.000000, X, Y) && !ellipse(27395.392400, 26362.489600, 400.776812, 400.776812, 0.000000, X, Y) && !ellipse(20713.405400, 24539.156600, 312.248009, 312.248009, 0.000000, X, Y) && !ellipse(28916.941100, 24570.122600, 420.192012, 420.192012, 0.000000, X, Y) && !ellipse(20591.523600, 24526.600000, 624.496018, 624.496018, 0.000000, X, Y) && !ellipse(27507.698200, 24307.258400, 449.986413, 449.986413, 0.000000, X, Y) && !ellipse(26965.131000, 23057.823000, 403.164812, 403.164812, 0.000000, X, Y) && !ellipse(23884.842102, 23014.765106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26169.054077, 38234.553284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29935.422882, 37170.390991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22077.595520, 36312.354553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25199.936523, 35682.916138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22124.706360, 35959.647186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12157.034744, 34477.596558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22272.065796, 33774.157166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21510.552200, 33504.128800, 452.577613, 452.577613, 0.000000, X, Y) && !ellipse(25929.821800, 31810.920400, 322.124009, 322.124009, 0.000000, X, Y) && !ellipse(16884.893204, 31966.910583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.130310, 31343.812378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27187.717133, 31074.297699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25804.393768, 30326.455597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25063.988403, 30072.871094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19274.764725, 30073.991516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17132.875595, 29850.804443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20325.620010, 29874.747498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22576.101166, 29627.683746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24983.716248, 29445.750519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23308.812256, 29195.346741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.861755, 28147.977509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22580.107605, 27902.878479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20641.378662, 27800.712952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24180.599091, 27673.584839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21218.070938, 27770.557129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30893.548615, 26740.387177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28541.861725, 26319.602203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.315186, 25263.561646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29759.614807, 24961.623749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22936.316956, 24926.290619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21135.711929, 24066.246979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15922.429153, 23504.673767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14984.806885, 23270.948883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22205.306412, 22033.834000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19404.336792, 21761.244797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20966.283890, 20875.735443, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 22:12:42 2013] Writing fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10.gif
[Sun Jun  9 22:12:49 2013] ../../xmm0011420101/products/events/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0011420101/products/events/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Jun  9 22:12:49 2013] Mean detx,y = (-5092.45, -2756.04) 
[Sun Jun  9 22:12:49 2013] ../../xmm0011420101/products/images/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_src.img and ../../xmm0011420101/products/images/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Jun  9 22:12:49 2013] ../../xmm0011420101/products/spectra/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0011420101/products/spectra/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Jun  9 22:12:49 2013] Setting source spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun  9 22:12:49 2013] Setting bgd. spectrum file to fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun  9 22:12:49 2013] ../../xmm0011420101/products/lightcurves/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0011420101/products/lightcurves/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Jun  9 23:30:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 23:30:35 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:18:34 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:18:35 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 10995.00
[Mon Jun 10 07:18:35 2013] Total counts from fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 19865.00
[Mon Jun 10 07:18:35 2013] Got source and background scale factors 4800240.000000, 95314951.000000
[Mon Jun 10 07:18:35 2013] User source parameters:
  Position = (247.0, 344.0) = 6 41 1.82 9 52 48.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 9994.6 +/- 105.9
  Background aperture counts = 1000.4
  Rate = 0.3 +/- 0.003

[Mon Jun 10 07:18:35 2013] Updating counts from extracted products
[Mon Jun 10 07:18:35 2013] Set source signif. to 9994.56/31.63 = 315.99
[Mon Jun 10 07:19:06 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:06 2013] Using photon index=1.80, rate=0.283, arf fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10.arf
[Mon Jun 10 07:19:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:07 2013] Updating source flux to 1.8e-12
[Mon Jun 10 07:20:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:21:23 2013] xmm0011420101/analysis//spectral/fullrun_pn_xmm0011420101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete