[Sun Jun  9 22:08:15 2013] Detection parameters:
  Position = (359.7, 283.2) = 6 40 28.66 9 48 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.1 +/- 18.3
  Background counts = 16.0
  Rate = 0.006 +/- 0.0005

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 4.58'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 8.72"
[Sun Jun  9 22:09:27 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.997
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.72"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src33.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src33.csv
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src33.csv
[Sun Jun  9 22:09:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Jun  9 22:09:29 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sun Jun  9 22:10:26 2013] Warning, spatial fit 33 centroid is now closest to src. 89
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 8.72"
[Sun Jun  9 22:11:07 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.997
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 8.72"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src33.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src33.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src33_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src33.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sun Jun  9 22:11:09 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Sun Jun  9 22:12:09 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 91 at 11.286253 pixels away
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:44 2013] XMMSAS src. selection expression = ellipse(31244.785095, 24586.709717, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src91_src.reg
[Mon Jun 10 04:28:44 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (322, 246) - (397, 321)
[Mon Jun 10 04:28:44 2013] XMMSAS bgd. selection expression = annulus(31244.785095, 24586.709717, 1087.500000, 2175.000000, X, Y) && !ellipse(28687.074000, 23361.034880, 1086.208031, 1086.208031, 0.000000, X, Y) && !ellipse(28406.510986, 23252.167206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28905.164220, 24572.227400, 395.830411, 395.830411, 0.000000, X, Y) && !ellipse(33058.431200, 26224.221400, 373.921611, 373.921611, 0.000000, X, Y) && !ellipse(32227.355564, 24611.872600, 310.377609, 310.377609, 0.000000, X, Y) && !ellipse(30798.891033, 26765.034089, 604.000858, 458.505122, 175.390720, X, Y) && !ellipse(29744.178467, 24917.568848, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src91.gif
[Mon Jun 10 04:44:33 2013] Mean detx,y = (-4047.32, -3217.35) 
[Mon Jun 10 04:44:34 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:44:42 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:44:42 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Mon Jun 10 04:44:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Mon Jun 10 06:28:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 06:28:50 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:42 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:42 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src91_src_b10.pi.gz = 273.00
[Mon Jun 10 07:19:42 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src91_bgd.pi.gz = 623.00
[Mon Jun 10 07:19:42 2013] Got source and background scale factors 1337600.000000, 8418908.000000
[Mon Jun 10 07:19:43 2013] User source parameters:
  Position = (359.7, 283.2) = 6 40 28.66 9 48 23.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 174.0 +/- 17.5
  Background aperture counts = 99.0
  Rate = 0.004 +/- 0.0004

[Mon Jun 10 07:19:43 2013] Updating counts from extracted products
[Mon Jun 10 07:19:43 2013] Set source signif. to 174.02/9.95 = 17.49
[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00433, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src91.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 7.4e-14
[Mon Jun 10 07:20:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src91_pl.csv not found, spectral fit skipped or did not complete