[Sun Jun  9 22:08:15 2013] Detection parameters:
  Position = (297.0, 289.1) = 6 40 47.10 9 48 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.5 +/- 19.8
  Background counts = 20.6
  Rate = 0.005 +/- 0.0005

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 0.68'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 6.77"
[Sun Jun  9 22:09:27 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.946
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 6.77"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src41.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src41.csv
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src41.csv
[Sun Jun  9 22:09:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Jun  9 22:09:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Jun  9 22:09:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun Jun  9 22:09:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:26 2013] Spatial fit model total counts = -534.419000, observed total counts = 3674.000000
[Sun Jun  9 22:10:26 2013] Poor agreement between spatial fit and data for source 87
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:26 2013] Source is confused with source 3
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 6.77"
[Sun Jun  9 22:11:07 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.946
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 6.77"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src41.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src41.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src41.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sun Jun  9 22:11:09 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sun Jun  9 22:11:09 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sun Jun  9 22:11:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:12:09 2013] Spatial fit model total counts = -811.788000, observed total counts = 3674.000000
[Sun Jun  9 22:12:09 2013] Poor agreement between spatial fit and data for source 87
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:44 2013] XMMSAS src. selection expression = ellipse(25794.822388, 25103.858978, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src87_src.reg
[Mon Jun 10 04:28:44 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (260, 252) - (335, 327)
[Mon Jun 10 04:28:45 2013] XMMSAS bgd. selection expression = annulus(25794.822388, 25103.858978, 1087.500000, 2175.000000, X, Y) && !ellipse(26125.217016, 25650.859531, 434.320159, 372.440095, 15.504462, X, Y) && !ellipse(28687.074000, 23361.034880, 1086.208031, 1086.208031, 0.000000, X, Y) && !ellipse(27804.512299, 27526.995361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28406.510986, 23252.167206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26582.264920, 24362.342800, 321.896009, 321.896009, 0.000000, X, Y) && !ellipse(27509.316000, 24299.465600, 321.885609, 321.885609, 0.000000, X, Y) && !ellipse(26962.878400, 23048.459400, 351.863210, 351.863210, 0.000000, X, Y) && !ellipse(23903.290200, 23010.330600, 402.190412, 402.190412, 0.000000, X, Y) && !ellipse(27393.232330, 26340.213196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23436.800380, 27485.245600, 305.635209, 305.635209, 0.000000, X, Y) && !ellipse(25032.998901, 23540.893677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24079.386719, 25282.908844, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:45 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src87.gif
[Mon Jun 10 04:46:52 2013] Mean detx,y = (1123.76, -2068.37) 
[Mon Jun 10 04:46:53 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:47:02 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:47:02 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Mon Jun 10 04:47:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Mon Jun 10 06:37:20 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 06:37:20 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:45 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:45 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src87_src_b10.pi.gz = 2161.00
[Mon Jun 10 07:19:45 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src87_bgd.pi.gz = 828.00
[Mon Jun 10 07:19:45 2013] Got source and background scale factors 1336780.000000, 5685724.000000
[Mon Jun 10 07:19:45 2013] User source parameters:
  Position = (297.0, 289.1) = 6 40 47.10 9 48 48.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1966.3 +/- 47.5
  Background aperture counts = 194.7
  Rate = 0.05 +/- 0.001

[Mon Jun 10 07:19:45 2013] Updating counts from extracted products
[Mon Jun 10 07:19:45 2013] Set source signif. to 1966.33/13.95 = 140.93
[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.0489, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src87.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 7.8e-13
[Mon Jun 10 07:20:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src87_pl.csv not found, spectral fit skipped or did not complete