[Sun Jun  9 22:08:15 2013] Detection parameters:
  Position = (315.4, 303.3) = 6 40 41.69 9 49 51.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.4 +/- 15.5
  Background counts = 19.9
  Rate = 0.004 +/- 0.0004

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 1.28'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 7.07"
[Sun Jun  9 22:09:27 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 7.07"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src55.ximg exists
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src55_1.ximg exists
[Sun Jun  9 22:09:28 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src55 appears to have run properly
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sun Jun  9 22:09:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sun Jun  9 22:09:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Sun Jun  9 22:09:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:26 2013] Spatial fit model total counts = 445.428000, observed total counts = 401.000000
[Sun Jun  9 22:10:26 2013] Poor agreement between spatial fit and data for source 81
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 7.07"
[Sun Jun  9 22:11:07 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.886
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 55 for pass 1, mean size = 7.07"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src55.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src55.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src55_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src55.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Sun Jun  9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src55.csv
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Sun Jun  9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src55.csv
[Sun Jun  9 22:11:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:12:09 2013] Spatial fit model total counts = 448.086000, observed total counts = 401.000000
[Sun Jun  9 22:12:09 2013] Poor agreement between spatial fit and data for source 81
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:45 2013] XMMSAS src. selection expression = ellipse(27393.232330, 26340.213196, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 04:28:45 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src81_src.reg
[Mon Jun 10 04:28:45 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (278, 266) - (353, 341)
[Mon Jun 10 04:28:45 2013] XMMSAS bgd. selection expression = annulus(27393.232330, 26340.213196, 1087.500000, 2175.000000, X, Y) && !ellipse(26125.217016, 25650.859531, 434.320159, 372.440095, 15.504462, X, Y) && !ellipse(28687.074000, 23361.034880, 1086.208031, 1086.208031, 0.000000, X, Y) && !ellipse(27804.512299, 27526.995361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26948.404200, 27686.150200, 311.623209, 311.623209, 0.000000, X, Y) && !ellipse(26582.264920, 24362.342800, 321.896009, 321.896009, 0.000000, X, Y) && !ellipse(28905.164220, 24572.227400, 395.830411, 395.830411, 0.000000, X, Y) && !ellipse(25794.822388, 25103.858978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27509.316000, 24299.465600, 321.885609, 321.885609, 0.000000, X, Y) && !ellipse(28974.663800, 27417.423200, 286.916808, 286.916808, 0.000000, X, Y) && !ellipse(28593.618680, 26322.536000, 267.881608, 267.881608, 0.000000, X, Y) && !ellipse(25032.998901, 23540.893677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29744.178467, 24917.568848, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:45 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src81.gif
[Mon Jun 10 04:50:36 2013] Mean detx,y = (-213.08, -1296.43) 
[Mon Jun 10 04:50:37 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:50:45 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:50:46 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Mon Jun 10 04:50:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Mon Jun 10 07:01:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 07:01:43 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:49 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:49 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src81_src_b10.pi.gz = 277.00
[Mon Jun 10 07:19:49 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src81_bgd.pi.gz = 1041.00
[Mon Jun 10 07:19:49 2013] Got source and background scale factors 1158480.000000, 6618604.000000
[Mon Jun 10 07:19:49 2013] User source parameters:
  Position = (315.4, 303.3) = 6 40 41.69 9 49 51.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 94.8 +/- 17.7
  Background aperture counts = 182.2
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 07:19:49 2013] Updating counts from extracted products
[Mon Jun 10 07:19:49 2013] Set source signif. to 94.79/13.50 = 7.02
[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00236, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src81.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 3.8e-14
[Mon Jun 10 07:20:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src81_pl.csv not found, spectral fit skipped or did not complete