[Sun Jun  9 22:08:15 2013] Detection parameters:
  Position = (356.0, 308.4) = 6 40 29.74 9 50 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.3 +/- 13.6
  Background counts = 13.0
  Rate = 0.003 +/- 0.0004

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 4.24'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 8.55"
[Sun Jun  9 22:09:27 2013] source mask rpix=2.0, npix_max = 24, mask sum = 17, frac = 0.699
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 73 for pass 0, mean size = 8.55"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src73.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src73.csv
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src73_1.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src73.csv
[Sun Jun  9 22:09:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Sun Jun  9 22:09:30 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Sun Jun  9 22:10:26 2013] Spatial fit model total counts = 204.982000, observed total counts = 218.000000
[Sun Jun  9 22:10:26 2013] Offset between fit and detection position for source 79 = 1.396332 pixels
[Sun Jun  9 22:10:26 2013] 205.325100 total counts/ 159.143000 bgd. counts: snr = 3.660833
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 1.396332 pixels
  Position = (354.7, 308.2) = 6 40 30.14 9 50 12.3
  Extent = 6.6 (4.8-9.4)", rotation angle = 0
  Source counts = 46.2 +/- 14.3
  Background counts = 159.1
  Rate = 0.001 +/- 0.0004
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 6.63"
[Sun Jun  9 22:11:07 2013] source mask rpix=1.5, npix_max = 16, mask sum = 12, frac = 0.733
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 72 for pass 1, mean size = 6.63"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src72.ximg exists
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src72_1.ximg exists
[Sun Jun  9 22:11:08 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src72 appears to have run properly
[Sun Jun  9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Sun Jun  9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Sun Jun  9 22:11:10 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Sun Jun  9 22:12:09 2013] Spatial fit model total counts = 210.685000, observed total counts = 216.000000
[Sun Jun  9 22:12:09 2013] Offset between fit and detection position for source 79 = 0.092813 pixels
[Sun Jun  9 22:12:09 2013] 210.611500 total counts/ 165.093000 bgd. counts: snr = 3.542612
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 0.092813 pixels
  Position = (354.6, 308.2) = 6 40 30.17 9 50 12.3
  Extent = 7.6" x 5.7", rotation angle = 175
  Source counts = 45.5 +/- 14.5
  Background counts = 165.1
  Rate = 0.001 +/- 0.0004
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.32
[Mon Jun 10 04:28:45 2013] XMMSAS src. selection expression = ellipse(30798.891033, 26765.034089, 453.000643, 343.878842, 175.390720, X, Y)
[Mon Jun 10 04:28:45 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src79_src.reg
[Mon Jun 10 04:28:45 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (329, 282) - (381, 334)
[Mon Jun 10 04:28:46 2013] XMMSAS bgd. selection expression = annulus(30798.891033, 26765.034089, 755.001072, 1510.002145, X, Y) && !ellipse(31244.785095, 24586.709717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30053.463305, 28286.639000, 366.505611, 366.505611, 0.000000, X, Y) && !ellipse(29744.178467, 24917.568848, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:46 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src79.gif
[Mon Jun 10 04:55:38 2013] Mean detx,y = (-3719.49, -991.53) 
[Mon Jun 10 04:55:39 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:55:47 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:55:47 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Mon Jun 10 04:55:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Mon Jun 10 07:07:34 2013] Not generating rmf since there are only 45 counts
[Mon Jun 10 07:07:34 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:53 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:53 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src79_src_b10.pi.gz = 96.00
[Mon Jun 10 07:19:53 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src79_bgd.pi.gz = 407.00
[Mon Jun 10 07:19:53 2013] Got source and background scale factors 433940.000000, 4922496.000000
[Mon Jun 10 07:19:53 2013] User source parameters:
  Position = (354.6, 308.2) = 6 40 30.17 9 50 12.3
  Extent = 7.6" x 5.7", rotation angle = 175
  Source aperture counts = 60.1 +/- 10.8
  Background aperture counts = 35.9
  Rate = 0.001 +/- 0.0003

[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00113, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src79.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 2.3e-14
[Mon Jun 10 07:20:27 2013] Source 79 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src79_pl.csv not found, spectral fit skipped or did not complete