[Sun Jun  9 22:08:14 2013] Detection parameters:
  Position = (333.6, 315.8) = 6 40 36.33 9 50 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.1 +/- 15.6
  Background counts = 17.4
  Rate = 0.004 +/- 0.0004

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 2.85'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 7.85"
[Sun Jun  9 22:09:27 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.177
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 7.85"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src61.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src61.csv
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src61_1.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src61.csv
[Sun Jun  9 22:09:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sun Jun  9 22:09:30 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sun Jun  9 22:10:26 2013] Source 77 is offset by -7.585461 and 6.008739 pixels which is larger than
2 X fitted extent = 7.219403 x 7.219403, not incorporating fit results
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 7.85 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 7.85"
[Sun Jun  9 22:11:07 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.177
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 7.85"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src61.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src61.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src61_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src61.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sun Jun  9 22:11:10 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Sun Jun  9 22:12:09 2013] Spatial fit model total counts = 298.398000, observed total counts = 299.000000
[Sun Jun  9 22:12:09 2013] Offset between fit and detection position for source 77 = 0.095467 pixels
[Sun Jun  9 22:12:09 2013] 288.417400 total counts/ 215.848000 bgd. counts: snr = 4.939461
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 0.095467 pixels
  Position = (333.6, 315.7) = 6 40 36.34 9 50 44.9
  Extent = 3.6 (2.8-5.1)", rotation angle = 0
  Source counts = 72.6 +/- 17.0
  Background counts = 215.8
  Rate = 0.002 +/- 0.0004
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:45 2013] XMMSAS src. selection expression = ellipse(28974.663800, 27417.423200, 215.187606, 215.187606, 0.000000, X, Y)
[Mon Jun 10 04:28:45 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src77_src.reg
[Mon Jun 10 04:28:45 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (321, 303) - (346, 328)
[Mon Jun 10 04:28:45 2013] XMMSAS bgd. selection expression = annulus(28974.663800, 27417.423200, 358.646010, 717.292021, X, Y) && !ellipse(27804.512299, 27526.995361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30053.463305, 28286.639000, 366.505611, 366.505611, 0.000000, X, Y) && !ellipse(27393.232330, 26340.213196, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:45 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src77.gif
[Mon Jun 10 04:52:49 2013] Mean detx,y = (-1930.40, -265.48) 
[Mon Jun 10 04:52:50 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:52:58 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:52:58 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Mon Jun 10 04:52:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Mon Jun 10 07:06:30 2013] Not generating rmf since there are only 72 counts
[Mon Jun 10 07:06:30 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:50 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:50 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src77_src_b10.pi.gz = 93.00
[Mon Jun 10 07:19:50 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src77_bgd.pi.gz = 93.00
[Mon Jun 10 07:19:50 2013] Got source and background scale factors 147200.000000, 920000.000000
[Mon Jun 10 07:19:50 2013] User source parameters:
  Position = (333.6, 315.7) = 6 40 36.34 9 50 44.9
  Extent = 3.6 (2.8-5.1)", rotation angle = 0
  Source aperture counts = 78.1 +/- 10.7
  Background aperture counts = 14.9
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00181, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src77.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 3.5e-14
[Mon Jun 10 07:20:27 2013] Flag b found in src. 77 procflags, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] Source 77 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src77_pl.csv not found, spectral fit skipped or did not complete