[Sun Jun  9 22:08:14 2013] Detection parameters:
  Position = (270.1, 316.4) = 6 40 55.03 9 50 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.9 +/- 14.7
  Background counts = 21.8
  Rate = 0.003 +/- 0.0004

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 2.43'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 7.64"
[Sun Jun  9 22:09:27 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.981
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 68 for pass 0, mean size = 7.64"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src68.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src68.csv
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src68_1.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src68.csv
[Sun Jun  9 22:09:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Sun Jun  9 22:09:30 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Sun Jun  9 22:10:26 2013] Spatial fit model total counts = 431.650000, observed total counts = 432.000000
[Sun Jun  9 22:10:26 2013] Offset between fit and detection position for source 76 = 0.197745 pixels
[Sun Jun  9 22:10:26 2013] Warning, changing simple spatial fit ID from 68 to 62
[Sun Jun  9 22:10:26 2013] 431.366700 total counts/ 372.244000 bgd. counts: snr = 3.064364
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 0.197745 pixels
  Position = (269.9, 316.5) = 6 40 55.08 9 50 48.5
  Extent = 3.6 (2.8-4.3)", rotation angle = 0
  Source counts = 59.1 +/- 20.8
  Background counts = 372.2
  Rate = 0.001 +/- 0.0005
[Sun Jun  9 22:10:26 2013] Spatial fit model total counts = 373.932000, observed total counts = 371.000000
[Sun Jun  9 22:10:26 2013] Offset between fit and detection position for source 76 = 0.042419 pixels
[Sun Jun  9 22:10:26 2013] Warning, changing simple spatial fit ID from 62 to 68
[Sun Jun  9 22:10:26 2013] 382.346900 total counts/ 316.023000 bgd. counts: snr = 3.730875
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 0.042419 pixels
  Position = (269.9, 316.5) = 6 40 55.08 9 50 48.3
  Extent = 3.8 (3.0-4.7)", rotation angle = 0
  Source counts = 66.3 +/- 19.6
  Background counts = 316.0
  Rate = 0.002 +/- 0.0005
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:26 2013] Source is confused with source 72
[Sun Jun  9 22:11:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 3.82"
[Sun Jun  9 22:11:07 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.790
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 67 for pass 1, mean size = 3.82"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src67.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src67.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src67_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src67.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Sun Jun  9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Sun Jun  9 22:11:10 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Sun Jun  9 22:12:09 2013] Warning, spatial fit 67 centroid is now closest to src. 66
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:45 2013] XMMSAS src. selection expression = ellipse(23436.800380, 27485.245600, 229.226407, 229.226407, 0.000000, X, Y)
[Mon Jun 10 04:28:45 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src76_src.reg
[Mon Jun 10 04:28:45 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (257, 303) - (283, 330)
[Mon Jun 10 04:28:45 2013] XMMSAS bgd. selection expression = annulus(23436.800380, 27485.245600, 382.044011, 764.088022, X, Y) && !ellipse(22011.990000, 27876.654000, 1341.736039, 1341.736039, 0.000000, X, Y) && !ellipse(23273.694240, 27977.562600, 310.491209, 310.491209, 0.000000, X, Y)
[Mon Jun 10 04:28:45 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src76.gif
[Mon Jun 10 04:54:35 2013] Mean detx,y = (3602.18, 51.26) 
[Mon Jun 10 04:54:36 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:54:43 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:54:44 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Mon Jun 10 04:54:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Mon Jun 10 07:07:09 2013] Not generating rmf since there are only 66 counts
[Mon Jun 10 07:07:09 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:51 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:51 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src76_src_b10.pi.gz = 95.00
[Mon Jun 10 07:19:51 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src76_bgd.pi.gz = 76.00
[Mon Jun 10 07:19:51 2013] Got source and background scale factors 168000.000000, 804800.000000
[Mon Jun 10 07:19:51 2013] User source parameters:
  Position = (269.9, 316.5) = 6 40 55.08 9 50 48.3
  Extent = 3.8 (3.0-4.7)", rotation angle = 0
  Source aperture counts = 79.1 +/- 10.8
  Background aperture counts = 15.9
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00165, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src76.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 3.4e-14
[Mon Jun 10 07:20:27 2013] Flag c found in src. 76 procflags, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] Source 76 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src76_pl.csv not found, spectral fit skipped or did not complete