[Sun Jun  9 22:08:14 2013] Detection parameters:
  Position = (251.0, 324.2) = 6 41 0.66 9 51 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 239.3 +/- 20.8
  Background counts = 20.6
  Rate = 0.007 +/- 0.0006

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 3.91'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 8.39"
[Sun Jun  9 22:09:27 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.848
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 8.39"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src23.csv
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src23.csv
[Sun Jun  9 22:09:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jun  9 22:09:29 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Jun  9 22:10:26 2013] Spatial fit model total counts = 1109.550000, observed total counts = 1179.000000
[Sun Jun  9 22:10:26 2013] Offset between fit and detection position for source 71 = 4.121297 pixels
[Sun Jun  9 22:10:26 2013] 1007.255000 total counts/ 246.648000 bgd. counts: snr = 48.430786
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 4.121297 pixels
  Position = (253.6, 321.0) = 6 40 59.90 9 51 7.8
  Extent = 16.8 (16.6-33.5)", rotation angle = 0
  Source counts = 760.6 +/- 31.7
  Background counts = 246.6
  Rate = 0.02 +/- 0.0008
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:26 2013] Source is confused with source 69
[Sun Jun  9 22:11:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 16.77"
[Sun Jun  9 22:11:07 2013] source mask rpix=3.9, npix_max = 75, mask sum = 72, frac = 0.949
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 16.77"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src23.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src23.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src23.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Jun  9 22:11:09 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Jun  9 22:12:09 2013] Warning, spatial fit 23 centroid is now closest to src. 72
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:44 2013] XMMSAS src. selection expression = ellipse(22011.990000, 27876.654000, 1006.302029, 1006.302029, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src71_src.reg
[Mon Jun 10 04:28:44 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (196, 263) - (311, 379)
[Mon Jun 10 04:28:44 2013] XMMSAS bgd. selection expression = annulus(22011.990000, 27876.654000, 1677.170048, 3354.340097, X, Y) && !ellipse(22408.291640, 31006.267200, 398.997611, 398.997611, 0.000000, X, Y) && !ellipse(20714.416800, 28727.621000, 422.079212, 422.079212, 0.000000, X, Y) && !ellipse(23064.323883, 31520.626709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21366.439660, 28750.758600, 297.491209, 297.491209, 0.000000, X, Y) && !ellipse(21522.439699, 24542.797879, 444.825844, 368.177229, 50.880357, X, Y) && !ellipse(21426.215840, 29877.284000, 379.489611, 379.489611, 0.000000, X, Y) && !ellipse(18245.731800, 29638.315600, 588.301617, 588.301617, 0.000000, X, Y) && !ellipse(22087.399800, 28702.226000, 321.129609, 321.129609, 0.000000, X, Y) && !ellipse(20815.468933, 25464.459747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22275.907623, 30322.119934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21163.772934, 30848.155579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22025.677750, 29264.889923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25794.822388, 25103.858978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25532.329240, 30892.476400, 410.477612, 278.386408, 102.422200, X, Y) && !ellipse(20715.907990, 24563.095886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18959.841080, 30132.123383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20307.904327, 24419.458801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20544.736923, 27452.288147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23273.694240, 27977.562600, 310.491209, 310.491209, 0.000000, X, Y) && !ellipse(23436.800380, 27485.245600, 305.635209, 305.635209, 0.000000, X, Y) && !ellipse(24300.688420, 29092.094000, 448.136013, 448.136013, 0.000000, X, Y) && !ellipse(24333.510193, 29523.452606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24949.543365, 29447.287781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19277.727737, 28726.011902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21308.980469, 27791.415039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24079.386719, 25282.908844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25632.289459, 31305.194977, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src71.gif
[Mon Jun 10 04:41:19 2013] Mean detx,y = (5103.88, 845.27) 
[Mon Jun 10 04:41:20 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:41:36 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:41:36 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Mon Jun 10 04:41:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Mon Jun 10 07:19:39 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:39 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src71_src_b10.pi.gz = 989.00
[Mon Jun 10 07:19:39 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src71_bgd.pi.gz = 1534.00
[Mon Jun 10 07:19:39 2013] Got source and background scale factors 3177600.000000, 12403336.000000
[Mon Jun 10 07:19:39 2013] User source parameters:
  Position = (253.6, 321.0) = 6 40 59.90 9 51 7.8
  Extent = 16.8 (16.6-33.5)", rotation angle = 0
  Source aperture counts = 596.0 +/- 32.5
  Background aperture counts = 393.0
  Rate = 0.01 +/- 0.0008

[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.0189, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src71.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 3.4e-13
[Mon Jun 10 07:20:27 2013] Flag c found in src. 71 procflags, skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src71_pl.csv not found, spectral fit skipped or did not complete