[Sun Jun  9 22:08:14 2013] Detection parameters:
  Position = (269.6, 131.0) = 6 40 55.16 9 37 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.3 +/- 11.8
  Background counts = 10.7
  Rate = 0.002 +/- 0.0003

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 12.32'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 12.59"
[Sun Jun  9 22:09:27 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.912
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 95 for pass 0, mean size = 12.59"
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src95.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src95.csv
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src95_1.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src95.csv
[Sun Jun  9 22:09:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Sun Jun  9 22:09:30 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly
[Sun Jun  9 22:10:26 2013] Warning, spatial fit 95 centroid is now closest to src. 64
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 12.59"
[Sun Jun  9 22:11:07 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.912
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 93 for pass 1, mean size = 12.59"
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src93.ximg exists
[Sun Jun  9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src93.csv
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src93_1.ximg exists
[Sun Jun  9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src93.csv
[Sun Jun  9 22:11:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Sun Jun  9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Sun Jun  9 22:11:10 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src93 appears to have run properly
[Sun Jun  9 22:12:09 2013] Source 65 is offset by 5.537966 and -6.014690 pixels which is larger than
2 X fitted extent = 2.030428 x 2.030428, not incorporating fit results
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:46 2013] XMMSAS src. selection expression = ellipse(23409.783020, 11351.405930, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 04:28:46 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src65_src.reg
[Mon Jun 10 04:28:46 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (232, 94) - (307, 169)
[Mon Jun 10 04:28:46 2013] XMMSAS bgd. selection expression = annulus(23409.783020, 11351.405930, 1087.500000, 2175.000000, X, Y) && !ellipse(25388.958679, 10469.068008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22923.531040, 11876.104000, 350.956810, 350.956810, 0.000000, X, Y) && !ellipse(23096.286308, 13975.134268, 602.934810, 343.152515, 0.000000, X, Y) && !ellipse(21422.603775, 12915.232788, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:46 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src65.gif
[Mon Jun 10 05:00:39 2013] Mean detx,y = (4460.55, -15982.64) 
[Mon Jun 10 05:00:40 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 05:00:51 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 05:00:51 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Mon Jun 10 05:00:51 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Mon Jun 10 07:09:57 2013] Not generating rmf since there are only 76 counts
[Mon Jun 10 07:09:57 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:57 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:57 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src65_src_b10.pi.gz = 184.00
[Mon Jun 10 07:19:57 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src65_bgd.pi.gz = 362.00
[Mon Jun 10 07:19:57 2013] Got source and background scale factors 1336000.000000, 5951239.000000
[Mon Jun 10 07:19:57 2013] User source parameters:
  Position = (269.6, 131.0) = 6 40 55.16 9 37 20.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 102.7 +/- 14.6
  Background aperture counts = 81.3
  Rate = 0.003 +/- 0.0004

[Mon Jun 10 07:19:57 2013] Updating counts from extracted products
[Mon Jun 10 07:19:57 2013] Set source signif. to 102.73/9.01 = 11.40
[Mon Jun 10 07:20:04 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:04 2013] Using photon index=1.80, rate=0.00256, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src65.arf
[Mon Jun 10 07:20:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:04 2013] Updating source flux to 1.1e-13
[Mon Jun 10 07:20:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src65_pl.csv not found, spectral fit skipped or did not complete