[Sun Jun  9 22:08:14 2013] Detection parameters:
  Position = (218.5, 346.9) = 6 41 10.22 9 53 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.3 +/- 14.1
  Background counts = 16.3
  Rate = 0.004 +/- 0.0006

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 6.78'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 9.82 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 9.82"
[Sun Jun  9 22:09:27 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.987
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 9.82"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src47.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src47.csv
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src47_1.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src47.csv
[Sun Jun  9 22:09:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sun Jun  9 22:09:30 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sun Jun  9 22:10:26 2013] Source 57 is offset by -0.684746 and -4.267708 pixels which is larger than
2 X fitted extent = 1.146428 x 1.146428, not incorporating fit results
[Sun Jun  9 22:10:26 2013] Warning, spatial fit 47 centroid is now closest to src. 62
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 9.82 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 9.82"
[Sun Jun  9 22:11:07 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.987
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 9.82"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src47.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src47.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src47_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src47.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sun Jun  9 22:11:09 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Sun Jun  9 22:12:09 2013] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 11.217075 pixels away
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:45 2013] XMMSAS src. selection expression = ellipse(18959.841080, 30132.123383, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 04:28:45 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src57_src.reg
[Mon Jun 10 04:28:45 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (181, 309) - (256, 384)
[Mon Jun 10 04:28:45 2013] XMMSAS bgd. selection expression = annulus(18959.841080, 30132.123383, 1087.500000, 2175.000000, X, Y) && !ellipse(20714.416800, 28727.621000, 422.079212, 422.079212, 0.000000, X, Y) && !ellipse(21366.439660, 28750.758600, 297.491209, 297.491209, 0.000000, X, Y) && !ellipse(21426.215840, 29877.284000, 379.489611, 379.489611, 0.000000, X, Y) && !ellipse(18245.731800, 29638.315600, 588.301617, 588.301617, 0.000000, X, Y) && !ellipse(22011.990000, 27876.654000, 1341.736039, 1341.736039, 0.000000, X, Y) && !ellipse(18120.031418, 32677.465454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21163.772934, 30848.155579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20544.736923, 27452.288147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18061.346480, 28771.198200, 375.170411, 375.170411, 0.000000, X, Y) && !ellipse(17013.163620, 29746.217000, 916.328026, 386.279211, 309.028000, X, Y) && !ellipse(19277.727737, 28726.011902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21308.980469, 27791.415039, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:45 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src57.gif
[Mon Jun 10 04:48:30 2013] Mean detx,y = (7957.10, 2866.26) 
[Mon Jun 10 04:48:31 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:48:47 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:48:48 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Mon Jun 10 04:48:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Mon Jun 10 06:49:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 06:49:28 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:47 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:47 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src57_src_b10.pi.gz = 255.00
[Mon Jun 10 07:19:47 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src57_bgd.pi.gz = 606.00
[Mon Jun 10 07:19:47 2013] Got source and background scale factors 1263844.000000, 5364940.000000
[Mon Jun 10 07:19:47 2013] User source parameters:
  Position = (218.5, 346.9) = 6 41 10.22 9 53 1.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 112.2 +/- 17.0
  Background aperture counts = 142.8
  Rate = 0.003 +/- 0.0004

[Mon Jun 10 07:19:47 2013] Updating counts from extracted products
[Mon Jun 10 07:19:47 2013] Set source signif. to 112.24/11.95 = 9.39
[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00279, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src57.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 7.1e-14
[Mon Jun 10 07:20:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src57_pl.csv not found, spectral fit skipped or did not complete