[Sun Jun  9 22:08:14 2013] Detection parameters:
  Position = (243.8, 355.1) = 6 41 2.77 9 53 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.2 +/- 17.3
  Background counts = 19.7
  Rate = 0.005 +/- 0.0006

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 5.71'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 9.28"
[Sun Jun  9 22:09:27 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.901
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 9.28"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src38.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src38.csv
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src38.csv
[Sun Jun  9 22:09:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun Jun  9 22:09:29 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Sun Jun  9 22:10:26 2013] Source 54 is offset by 7.841229 and 4.655696 pixels which is larger than
2 X fitted extent = 1.632860 x 1.632860, not incorporating fit results
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 9.28"
[Sun Jun  9 22:11:07 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.901
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 9.28"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src38.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src38.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src38_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src38.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sun Jun  9 22:11:09 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Sun Jun  9 22:12:09 2013] Source 54 is offset by 7.842907 and 4.655949 pixels which is larger than
2 X fitted extent = 1.614740 x 1.614740, not incorporating fit results
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:44 2013] XMMSAS src. selection expression = ellipse(21163.772934, 30848.155579, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src54_src.reg
[Mon Jun 10 04:28:44 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (206, 318) - (281, 393)
[Mon Jun 10 04:28:44 2013] XMMSAS bgd. selection expression = annulus(21163.772934, 30848.155579, 1087.500000, 2175.000000, X, Y) && !ellipse(22408.291640, 31006.267200, 398.997611, 398.997611, 0.000000, X, Y) && !ellipse(20714.416800, 28727.621000, 422.079212, 422.079212, 0.000000, X, Y) && !ellipse(23064.323883, 31520.626709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21366.439660, 28750.758600, 297.491209, 297.491209, 0.000000, X, Y) && !ellipse(21426.215840, 29877.284000, 379.489611, 379.489611, 0.000000, X, Y) && !ellipse(22187.169600, 32912.013000, 439.059213, 334.354410, 332.515200, X, Y) && !ellipse(22087.399800, 28702.226000, 321.129609, 321.129609, 0.000000, X, Y) && !ellipse(22011.990000, 27876.654000, 1341.736039, 1341.736039, 0.000000, X, Y) && !ellipse(18120.031418, 32677.465454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22275.907623, 30322.119934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22025.677750, 29264.889923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18959.841080, 30132.123383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22548.669403, 33331.765564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19277.727737, 28726.011902, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src54.gif
[Mon Jun 10 04:45:49 2013] Mean detx,y = (5673.37, 3509.26) 
[Mon Jun 10 04:45:50 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:46:13 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:46:13 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Mon Jun 10 04:46:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Mon Jun 10 06:37:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 06:37:09 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:44 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:44 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src54_src_b10.pi.gz = 505.00
[Mon Jun 10 07:19:44 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src54_bgd.pi.gz = 1000.00
[Mon Jun 10 07:19:44 2013] Got source and background scale factors 1231604.000000, 4880656.000000
[Mon Jun 10 07:19:44 2013] User source parameters:
  Position = (243.8, 355.1) = 6 41 2.77 9 53 37.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 252.7 +/- 23.5
  Background aperture counts = 252.3
  Rate = 0.006 +/- 0.0006

[Mon Jun 10 07:19:44 2013] Updating counts from extracted products
[Mon Jun 10 07:19:44 2013] Set source signif. to 252.66/15.89 = 15.90
[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00629, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src54.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 1.4e-13
[Mon Jun 10 07:20:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete