[Sun Jun  9 22:08:13 2013] Detection parameters:
  Position = (382.2, 367.2) = 6 40 22.02 9 54 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.4 +/- 14.4
  Background counts = 13.8
  Rate = 0.005 +/- 0.0006

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 7.86'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Sun Jun  9 22:09:27 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.904
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 10.36"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src39.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src39.csv
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src39.csv
[Sun Jun  9 22:09:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sun Jun  9 22:09:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:26 2013] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 12.749475 pixels away
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 10.36"
[Sun Jun  9 22:11:07 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.904
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 10.36"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src39.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src39.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src39_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src39.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sun Jun  9 22:11:09 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sun Jun  9 22:12:09 2013] Spatial fit model total counts = 268.567000, observed total counts = 258.000000
[Sun Jun  9 22:12:09 2013] Offset between fit and detection position for source 48 = 0.348759 pixels
[Sun Jun  9 22:12:09 2013] 269.398300 total counts/ 185.517000 bgd. counts: snr = 6.158477
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.348759 pixels
  Position = (381.9, 367.4) = 6 40 22.11 9 54 29.7
  Extent = 3.4 (2.9-4.2)", rotation angle = 0
  Source counts = 83.9 +/- 16.4
  Background counts = 185.5
  Rate = 0.002 +/- 0.0004
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:44 2013] XMMSAS src. selection expression = ellipse(33179.460520, 31914.178200, 201.355806, 201.355806, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src48_src.reg
[Mon Jun 10 04:28:44 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (370, 356) - (394, 379)
[Mon Jun 10 04:28:44 2013] XMMSAS bgd. selection expression = annulus(33179.460520, 31914.178200, 335.593010, 671.186019, X, Y) && !ellipse(32762.245850, 32985.114319, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src48.gif
[Mon Jun 10 04:46:17 2013] Mean detx,y = (-6340.04, 4022.66) 
[Mon Jun 10 04:46:18 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:46:30 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:46:30 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Mon Jun 10 04:46:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Mon Jun 10 06:37:12 2013] Not generating rmf since there are only 83 counts
[Mon Jun 10 06:37:12 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:45 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:45 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 97.00
[Mon Jun 10 07:19:45 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src48_bgd.pi.gz = 75.00
[Mon Jun 10 07:19:45 2013] Got source and background scale factors 121076.000000, 717624.000000
[Mon Jun 10 07:19:45 2013] User source parameters:
  Position = (381.9, 367.4) = 6 40 22.11 9 54 29.7
  Extent = 3.4 (2.9-4.2)", rotation angle = 0
  Source aperture counts = 84.3 +/- 10.9
  Background aperture counts = 12.7
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00209, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src48.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 7.3e-14
[Mon Jun 10 07:20:27 2013] Source 48 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete