[Sun Jun  9 22:08:13 2013] Detection parameters:
  Position = (377.1, 379.7) = 6 40 23.52 9 55 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.1 +/- 18.3
  Background counts = 14.0
  Rate = 0.008 +/- 0.0007

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 8.20'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 10.53"
[Sun Jun  9 22:09:27 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.055
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 10.53"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src21.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src21.csv
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src21.csv
[Sun Jun  9 22:09:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Jun  9 22:09:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:26 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 13.814978 pixels away
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 10.53"
[Sun Jun  9 22:11:07 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.055
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 10.53"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src21.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src21.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src21.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Jun  9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Jun  9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Jun  9 22:11:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:12:09 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 11.257342 pixels away
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:44 2013] XMMSAS src. selection expression = ellipse(32762.245850, 32985.114319, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src45_src.reg
[Mon Jun 10 04:28:44 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (340, 342) - (415, 417)
[Mon Jun 10 04:28:44 2013] XMMSAS bgd. selection expression = annulus(32762.245850, 32985.114319, 1087.500000, 2175.000000, X, Y) && !ellipse(33179.460520, 31914.178200, 268.474408, 268.474408, 0.000000, X, Y) && !ellipse(31565.762207, 32274.405457, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src45.gif
[Mon Jun 10 04:40:33 2013] Mean detx,y = (-5944.97, 5111.45) 
[Mon Jun 10 04:40:34 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:40:58 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:40:58 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon Jun 10 04:40:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Mon Jun 10 06:11:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 06:11:50 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:39 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:39 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 261.00
[Mon Jun 10 07:19:39 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src45_bgd.pi.gz = 537.00
[Mon Jun 10 07:19:39 2013] Got source and background scale factors 1294336.000000, 8120958.000000
[Mon Jun 10 07:19:39 2013] User source parameters:
  Position = (377.1, 379.7) = 6 40 23.52 9 55 22.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 175.4 +/- 17.2
  Background aperture counts = 85.6
  Rate = 0.004 +/- 0.0004

[Mon Jun 10 07:19:39 2013] Updating counts from extracted products
[Mon Jun 10 07:19:39 2013] Set source signif. to 175.41/9.25 = 18.96
[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00436, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src45.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 9.7e-14
[Mon Jun 10 07:20:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete