[Sun Jun  9 22:08:13 2013] Detection parameters:
  Position = (285.4, 386.2) = 6 40 50.52 9 55 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.6 +/- 11.1
  Background counts = 18.3
  Rate = 0.003 +/- 0.0004

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 6.43'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 9.65"
[Sun Jun  9 22:09:27 2013] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.745
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 74 for pass 0, mean size = 9.65"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src74.ximg exists
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src74_1.ximg exists
[Sun Jun  9 22:09:28 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src74 appears to have run properly
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Sun Jun  9 22:09:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src74.csv
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Sun Jun  9 22:09:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src74.csv
[Sun Jun  9 22:09:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:26 2013] Warning, spatial fit 74 centroid is now closest to src. 38
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 9.65"
[Sun Jun  9 22:11:07 2013] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.745
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 73 for pass 1, mean size = 9.65"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src73.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src73.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src73_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src73.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Sun Jun  9 22:11:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src73.csv
[Sun Jun  9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Sun Jun  9 22:11:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src73.csv
[Sun Jun  9 22:11:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:12:09 2013] Spatial fit model total counts = 230.706000, observed total counts = 209.000000
[Sun Jun  9 22:12:09 2013] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:46 2013] XMMSAS src. selection expression = ellipse(24783.779266, 33552.958710, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 04:28:46 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src42_src.reg
[Mon Jun 10 04:28:46 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (248, 349) - (323, 424)
[Mon Jun 10 04:28:46 2013] XMMSAS bgd. selection expression = annulus(24783.779266, 33552.958710, 1087.500000, 2175.000000, X, Y) && !ellipse(22408.291640, 31006.267200, 398.997611, 398.997611, 0.000000, X, Y) && !ellipse(23064.323883, 31520.626709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22187.169600, 32912.013000, 439.059213, 334.354410, 332.515200, X, Y) && !ellipse(26459.025800, 35801.268200, 580.921617, 580.921617, 0.000000, X, Y) && !ellipse(22668.320953, 34306.371063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24783.151400, 32463.025000, 453.273613, 274.656808, 138.917400, X, Y) && !ellipse(27556.476807, 31480.368500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22548.669403, 33331.765564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25970.757412, 31827.471493, 372.966533, 255.951469, 277.425242, X, Y) && !ellipse(25225.931200, 35683.065800, 515.680310, 515.680310, 0.000000, X, Y) && !ellipse(27162.595245, 31065.642303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24320.686401, 34518.199921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25632.289459, 31305.194977, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:46 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src42.gif
[Mon Jun 10 04:55:51 2013] Mean detx,y = (1959.71, 5974.05) 
[Mon Jun 10 04:55:52 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:56:16 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:56:16 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Jun 10 04:56:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon Jun 10 07:07:39 2013] Not generating rmf since there are only 69 counts
[Mon Jun 10 07:07:39 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:53 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:53 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 157.00
[Mon Jun 10 07:19:53 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src42_bgd.pi.gz = 568.00
[Mon Jun 10 07:19:53 2013] Got source and background scale factors 1134480.000000, 5776490.000000
[Mon Jun 10 07:19:53 2013] User source parameters:
  Position = (285.4, 386.2) = 6 40 50.52 9 55 53.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 45.4 +/- 13.6
  Background aperture counts = 111.6
  Rate = 0.001 +/- 0.0003

[Mon Jun 10 07:19:53 2013] Updating counts from extracted products
[Mon Jun 10 07:19:53 2013] Set source signif. to 45.45/10.56 = 4.30
[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00113, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src42.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 2.9e-14
[Mon Jun 10 07:20:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete