[Sun Jun  9 22:08:13 2013] Detection parameters:
  Position = (305.2, 411.9) = 6 40 44.69 9 57 44.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.2 +/- 15.9
  Background counts = 13.3
  Rate = 0.007 +/- 0.0007

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 8.24'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 10.55"
[Sun Jun  9 22:09:27 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.052
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 10.55"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src24.ximg exists
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Jun  9 22:09:28 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src24 appears to have run properly
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Jun  9 22:09:29 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Sun Jun  9 22:10:26 2013] Spatial fit model total counts = 300.406000, observed total counts = 275.000000
[Sun Jun  9 22:10:26 2013] Offset between fit and detection position for source 35 = 0.614137 pixels
[Sun Jun  9 22:10:26 2013] 298.769700 total counts/ 205.259000 bgd. counts: snr = 6.526949
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.614137 pixels
  Position = (304.6, 411.8) = 6 40 44.87 9 57 42.8
  Extent = 7.5" x 2.7", rotation angle = 354
  Source counts = 93.5 +/- 17.3
  Background counts = 205.3
  Rate = 0.002 +/- 0.0004
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 2.81
[Sun Jun  9 22:10:26 2013] Source is asymmetric
[Sun Jun  9 22:11:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 5.05"
[Sun Jun  9 22:11:07 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.815
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 5.05"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src24.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src24.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src24_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src24.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sun Jun  9 22:11:09 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Sun Jun  9 22:12:09 2013] Spatial fit model total counts = 274.601000, observed total counts = 275.000000
[Sun Jun  9 22:12:09 2013] Offset between fit and detection position for source 35 = 0.312968 pixels
[Sun Jun  9 22:12:09 2013] 273.443000 total counts/ 148.502000 bgd. counts: snr = 10.252714
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.312968 pixels
  Position = (304.7, 412.1) = 6 40 44.85 9 57 44.1
  Extent = 7.3 (5.0-8.8)", rotation angle = 0
  Source counts = 124.9 +/- 16.5
  Background counts = 148.5
  Rate = 0.003 +/- 0.0004
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:44 2013] XMMSAS src. selection expression = ellipse(26459.025800, 35801.268200, 435.691213, 435.691213, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src35_src.reg
[Mon Jun 10 04:28:44 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (280, 387) - (330, 437)
[Mon Jun 10 04:28:44 2013] XMMSAS bgd. selection expression = annulus(26459.025800, 35801.268200, 726.152021, 1452.304042, X, Y) && !ellipse(28435.639313, 35865.773315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24783.779266, 33552.958710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.931200, 35683.065800, 515.680310, 515.680310, 0.000000, X, Y) && !ellipse(24320.686401, 34518.199921, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src35.gif
[Mon Jun 10 04:41:39 2013] Mean detx,y = (190.25, 8220.07) 
[Mon Jun 10 04:41:40 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:42:03 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:42:03 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon Jun 10 04:42:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Mon Jun 10 07:19:39 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:39 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 177.00
[Mon Jun 10 07:19:39 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src35_bgd.pi.gz = 241.00
[Mon Jun 10 07:19:39 2013] Got source and background scale factors 516348.000000, 3635316.000000
[Mon Jun 10 07:19:40 2013] User source parameters:
  Position = (304.7, 412.1) = 6 40 44.85 9 57 44.1
  Extent = 7.3 (5.0-8.8)", rotation angle = 0
  Source aperture counts = 142.8 +/- 14.3
  Background aperture counts = 34.2
  Rate = 0.004 +/- 0.0004

[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00311, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src35.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Getting flux using calc_pl_flux failed
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete