[Sun Jun  9 22:08:13 2013] Detection parameters:
  Position = (229.4, 422.9) = 6 41 7.00 9 58 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.2 +/- 11.5
  Background counts = 9.5
  Rate = 0.002 +/- 0.0003

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 10.31'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 11.59"
[Sun Jun  9 22:09:27 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.049
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 97 for pass 0, mean size = 11.59"
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src97.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src97.csv
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src97_1.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src97.csv
[Sun Jun  9 22:09:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Sun Jun  9 22:09:30 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src97 appears to have run properly
[Sun Jun  9 22:10:26 2013] Source 31 is offset by -2.323387 and -3.368050 pixels which is larger than
2 X fitted extent = 1.278418 x 1.278418, not incorporating fit results
[Sun Jun  9 22:10:26 2013] Warning: source 97 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 15.485206 pixels away
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 11.59"
[Sun Jun  9 22:11:07 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.049
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 95 for pass 1, mean size = 11.59"
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src95.ximg exists
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src95_1.ximg exists
[Sun Jun  9 22:11:09 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src95 appears to have run properly
[Sun Jun  9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src95.ximg exists
[Sun Jun  9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src95_1.ximg exists
[Sun Jun  9 22:11:10 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src95 appears to have run properly
[Sun Jun  9 22:12:09 2013] Warning, spatial fit 95 centroid is now closest to src. 29
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:46 2013] XMMSAS src. selection expression = ellipse(19913.587341, 36740.257660, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 04:28:46 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src31_src.reg
[Mon Jun 10 04:28:46 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (192, 385) - (267, 460)
[Mon Jun 10 04:28:46 2013] XMMSAS bgd. selection expression = annulus(19913.587341, 36740.257660, 1087.500000, 2175.000000, X, Y) && !ellipse(22668.320953, 34306.371063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19270.099838, 33957.593140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20941.434200, 36156.610020, 748.762422, 748.762422, 0.000000, X, Y) && !ellipse(21018.334412, 39257.493591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21948.158859, 37112.182129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21537.695312, 39245.622955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22156.193100, 38202.210800, 520.928815, 520.928815, 0.000000, X, Y) && !ellipse(18850.222885, 35759.627899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22756.430756, 38271.835205, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:46 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src31.gif
[Mon Jun 10 05:01:23 2013] Mean detx,y = (6687.29, 9448.02) 
[Mon Jun 10 05:01:24 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 05:01:33 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 05:01:33 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon Jun 10 05:01:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Mon Jun 10 07:10:07 2013] Not generating rmf since there are only 75 counts
[Mon Jun 10 07:10:07 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:57 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:57 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 133.00
[Mon Jun 10 07:19:58 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 334.00
[Mon Jun 10 07:19:58 2013] Got source and background scale factors 1130260.000000, 6479156.000000
[Mon Jun 10 07:19:58 2013] User source parameters:
  Position = (229.4, 422.9) = 6 41 7.00 9 58 32.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 74.7 +/- 12.6
  Background aperture counts = 58.3
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 07:19:58 2013] Updating counts from extracted products
[Mon Jun 10 07:19:58 2013] Set source signif. to 74.74/7.63 = 9.79
[Mon Jun 10 07:20:04 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:04 2013] Using photon index=1.80, rate=0.00186, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src31.arf
[Mon Jun 10 07:20:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:04 2013] Updating source flux to 8e-14
[Mon Jun 10 07:20:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete