[Sun Jun 9 22:08:13 2013] Detection parameters: Position = (255.7, 439.8) = 6 40 59.28 9 59 45.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 71.6 +/- 11.6 Background counts = 11.7 Rate = 0.002 +/- 0.0003 [Sun Jun 9 22:08:17 2013] Off-axis axis estimate = 10.71' [Sun Jun 9 22:09:27 2013] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 11.78" [Sun Jun 9 22:09:27 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.020 [Sun Jun 9 22:09:27 2013] Giving source the simple spatial ID 99 for pass 0, mean size = 11.78" [Sun Jun 9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src99.ximg exists [Sun Jun 9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src99.csv [Sun Jun 9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src99_1.ximg exists [Sun Jun 9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src99.csv [Sun Jun 9 22:09:29 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src99_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src99.ximg exists [Sun Jun 9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists [Sun Jun 9 22:09:30 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly [Sun Jun 9 22:10:26 2013] Source 27 is offset by 2.813698 and -1.336143 pixels which is larger than 2 X fitted extent = 1.419586 x 1.419586, not incorporating fit results [Sun Jun 9 22:10:26 2013] Source 27 is offset by -3.116670 and -1.405776 pixels which is larger than 2 X fitted extent = 1.410878 x 1.410878, not incorporating fit results [Sun Jun 9 22:10:26 2013] Warning, spatial fit 99 centroid is now closest to src. 29 [Sun Jun 9 22:10:26 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 22:10:26 2013] Assessing source extent using major [Sun Jun 9 22:10:26 2013] Source does appear to be extended [Sun Jun 9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 22:10:26 2013] Source is confused with source 25 [Sun Jun 9 22:11:07 2013] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 11.78" [Sun Jun 9 22:11:07 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.020 [Sun Jun 9 22:11:07 2013] Giving source the simple spatial ID 97 for pass 1, mean size = 11.78" [Sun Jun 9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src97.ximg exists [Sun Jun 9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src97.csv [Sun Jun 9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src97_1.ximg exists [Sun Jun 9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src97.csv [Sun Jun 9 22:11:09 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src97_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src97.ximg exists [Sun Jun 9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src97_1.ximg exists [Sun Jun 9 22:11:10 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src97 appears to have run properly [Sun Jun 9 22:12:09 2013] Spatial fit model total counts = 180.007000, observed total counts = 181.000000 [Sun Jun 9 22:12:09 2013] Offset between fit and detection position for source 27 = 0.466727 pixels [Sun Jun 9 22:12:09 2013] 171.012000 total counts/ 118.558000 bgd. counts: snr = 4.817405 Spatial fit parameters: Offset between fit and detection position for source 27 = 0.466727 pixels Position = (255.2, 439.7) = 6 40 59.41 9 59 44.1 Extent = 6.5 (4.6-8.8)", rotation angle = 0 Source counts = 52.5 +/- 13.1 Background counts = 118.6 Rate = 0.001 +/- 0.0003 [Sun Jun 9 22:12:09 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 22:12:09 2013] Assessing source extent using major axis lower bound [Sun Jun 9 22:12:09 2013] Source does appear to be extended [Sun Jun 9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 10 04:28:46 2013] XMMSAS src. selection expression = ellipse(22156.193100, 38202.210800, 390.696611, 390.696611, 0.000000, X, Y) [Mon Jun 10 04:28:46 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src27_src.reg [Mon Jun 10 04:28:46 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (233, 417) - (278, 462) [Mon Jun 10 04:28:46 2013] XMMSAS bgd. selection expression = annulus(22156.193100, 38202.210800, 651.161019, 1302.322037, X, Y) && !ellipse(20941.434200, 36156.610020, 748.762422, 748.762422, 0.000000, X, Y) && !ellipse(21018.334412, 39257.493591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21948.158859, 37112.182129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21537.695312, 39245.622955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22756.430756, 38271.835205, 870.000000, 870.000000, 0.000000, X, Y) [Mon Jun 10 04:28:46 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src27.gif [Mon Jun 10 05:01:48 2013] Mean detx,y = (4360.18, 10802.52) [Mon Jun 10 05:01:49 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jun 10 05:01:57 2013] Binned source spectrum to 10 counts/bin [Mon Jun 10 05:01:57 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src27_src_b10.pi.gz [Mon Jun 10 05:01:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src27_bgd.pi.gz [Mon Jun 10 07:10:18 2013] Not generating rmf since there are only 52 counts [Mon Jun 10 07:10:18 2013] rmf not generated due to insufficient counts [Mon Jun 10 07:19:58 2013] Updating aperture counts using extracted products [Mon Jun 10 07:19:58 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 85.00 [Mon Jun 10 07:19:58 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 36.00 [Mon Jun 10 07:19:58 2013] Got source and background scale factors 486400.000000, 719316.000000 [Mon Jun 10 07:19:58 2013] User source parameters: Position = (255.2, 439.7) = 6 40 59.41 9 59 44.1 Extent = 6.5 (4.6-8.8)", rotation angle = 0 Source aperture counts = 60.7 +/- 10.3 Background aperture counts = 24.3 Rate = 0.002 +/- 0.0003 [Mon Jun 10 07:20:04 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 10 07:20:04 2013] Using photon index=1.80, rate=0.00131, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src27.arf [Mon Jun 10 07:20:04 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 10 07:20:04 2013] Updating source flux to 5e-14 [Mon Jun 10 07:20:27 2013] Flag b found in src. 27 procflags, skipping spectral fitting [Mon Jun 10 07:20:27 2013] Flag c found in src. 27 procflags, skipping spectral fitting [Mon Jun 10 07:20:27 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting [Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete