[Sun Jun  9 22:08:16 2013] Detection parameters:
  Position = (389.6, 238.3) = 6 40 19.87 9 45 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.8 +/- 16.3
  Background counts = 17.9
  Rate = 0.006 +/- 0.0006

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 7.92'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 10.39"
[Sun Jun  9 22:09:27 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.899
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 10.39"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src30.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src30.csv
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src30.csv
[Sun Jun  9 22:09:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun Jun  9 22:09:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:26 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 112 at 12.597896 pixels away
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 10.39"
[Sun Jun  9 22:11:07 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.899
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 10.39"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src30.ximg exists
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun Jun  9 22:11:08 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src30 appears to have run properly
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun Jun  9 22:11:09 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sun Jun  9 22:12:09 2013] Spatial fit model total counts = 340.643000, observed total counts = 317.000000
[Sun Jun  9 22:12:09 2013] Offset between fit and detection position for source 112 = 0.263730 pixels
[Sun Jun  9 22:12:09 2013] 331.881000 total counts/ 231.569000 bgd. counts: snr = 6.591931
Spatial fit parameters:
  Offset between fit and detection position for source 112 = 0.263730 pixels
  Position = (389.4, 238.5) = 6 40 19.91 9 45 9.1
  Extent = 5.6 (4.3-7.1)" x 3.6 (2.6-4.7)", rotation angle = 325 (297-346) degrees
  Source counts = 100.3 +/- 18.2
  Background counts = 231.6
  Rate = 0.002 +/- 0.0005
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91
[Mon Jun 10 04:28:44 2013] XMMSAS src. selection expression = ellipse(33833.592200, 20703.293600, 338.350810, 213.229806, 325.444711, X, Y)
[Mon Jun 10 04:28:44 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src112_src.reg
[Mon Jun 10 04:28:44 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (370, 219) - (409, 258)
[Mon Jun 10 04:28:44 2013] XMMSAS bgd. selection expression = annulus(33833.592200, 20703.293600, 563.918016, 1127.836032, X, Y) && !ellipse(33350.613617, 19871.668411, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src112.gif
[Mon Jun 10 04:43:38 2013] Mean detx,y = (-6480.71, -7201.99) 
[Mon Jun 10 04:43:40 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:43:54 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:43:54 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src112_src_b10.pi.gz
[Mon Jun 10 04:43:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src112_bgd.pi.gz
[Mon Jun 10 07:19:41 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:41 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src112_src_b10.pi.gz = 120.00
[Mon Jun 10 07:19:41 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src112_bgd.pi.gz = 150.00
[Mon Jun 10 07:19:41 2013] Got source and background scale factors 224000.000000, 1652555.000000
[Mon Jun 10 07:19:41 2013] User source parameters:
  Position = (389.4, 238.5) = 6 40 19.91 9 45 9.1
  Extent = 5.6 (4.3-7.1)" x 3.6 (2.6-4.7)", rotation angle = 325 (297-346) degrees
  Source aperture counts = 99.7 +/- 12.0
  Background aperture counts = 20.3
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.0025, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src112.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 8.5e-14
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src112_pl.csv not found, spectral fit skipped or did not complete