[Sun Jun  9 22:08:16 2013] Detection parameters:
  Position = (183.9, 243.8) = 6 41 20.40 9 45 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.2 +/- 14.6
  Background counts = 11.5
  Rate = 0.003 +/- 0.0004

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 9.20'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 11.03 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 11.03"
[Sun Jun  9 22:09:27 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.977
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 11.03"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src70.ximg exists
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src70_1.ximg exists
[Sun Jun  9 22:09:28 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src70 appears to have run properly
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Sun Jun  9 22:09:30 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Sun Jun  9 22:09:30 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Sun Jun  9 22:10:26 2013] Spatial fit model total counts = 268.152000, observed total counts = 270.000000
[Sun Jun  9 22:10:26 2013] Offset between fit and detection position for source 110 = 0.235843 pixels
[Sun Jun  9 22:10:26 2013] 189.978800 total counts/ 133.599000 bgd. counts: snr = 4.877777
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 0.235843 pixels
  Position = (184.1, 243.7) = 6 41 20.34 9 45 31.6
  Extent = 4.6" x 3.0", rotation angle = 50
  Source counts = 56.4 +/- 13.8
  Background counts = 133.6
  Rate = 0.001 +/- 0.0003
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.50
[Sun Jun  9 22:10:26 2013] Source is asymmetric
[Sun Jun  9 22:10:26 2013] Source is confused with source 109
[Sun Jun  9 22:11:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 3.79"
[Sun Jun  9 22:11:07 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.796
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 3.79"
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src69.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src69.csv
[Sun Jun  9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src69_1.ximg exists
[Sun Jun  9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src69.csv
[Sun Jun  9 22:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Sun Jun  9 22:11:10 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Sun Jun  9 22:11:10 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Sun Jun  9 22:12:09 2013] Spatial fit model total counts = 270.799000, observed total counts = 270.000000
[Sun Jun  9 22:12:09 2013] Offset between fit and detection position for source 110 = 0.224708 pixels
[Sun Jun  9 22:12:09 2013] 168.874500 total counts/ 127.888000 bgd. counts: snr = 3.624315
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 0.224708 pixels
  Position = (184.2, 243.5) = 6 41 20.32 9 45 30.7
  Extent = 3.7 (2.6-5.7)", rotation angle = 0
  Source counts = 41.0 +/- 13.0
  Background counts = 127.9
  Rate = 0.001 +/- 0.0003
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:45 2013] XMMSAS src. selection expression = ellipse(15973.357260, 21135.196600, 219.092406, 219.092406, 0.000000, X, Y)
[Mon Jun 10 04:28:45 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src110_src.reg
[Mon Jun 10 04:28:45 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (172, 231) - (197, 256)
[Mon Jun 10 04:28:45 2013] XMMSAS bgd. selection expression = annulus(15973.357260, 21135.196600, 365.154011, 730.308021, X, Y) && !ellipse(17437.546844, 22477.323456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15835.456000, 21169.322400, 1009.552029, 1009.552029, 0.000000, X, Y)
[Mon Jun 10 04:28:45 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src110.gif
[Mon Jun 10 04:54:59 2013] Mean detx,y = (11363.82, -5938.92) 
[Mon Jun 10 04:55:00 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:55:06 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:55:07 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src110_src_b10.pi.gz
[Mon Jun 10 04:55:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src110_bgd.pi.gz
[Mon Jun 10 07:07:19 2013] Not generating rmf since there are only 40 counts
[Mon Jun 10 07:07:19 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:52 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:52 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src110_src_b10.pi.gz = 74.00
[Mon Jun 10 07:19:52 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src110_bgd.pi.gz = 0.00
[Mon Jun 10 07:19:52 2013] Got source and background scale factors 150400.000000, 0.000000
[Mon Jun 10 07:19:52 2013] Background scale factor is not positive, halting re-assessment of this source
[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00102, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src110.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 5.8e-14
[Mon Jun 10 07:20:27 2013] Flag c found in src. 110 procflags, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] Source 110 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src110_pl.csv not found, spectral fit skipped or did not complete