[Sun Jun  9 22:08:16 2013] Detection parameters:
  Position = (311.3, 250.1) = 6 40 42.90 9 45 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 224.6 +/- 37.6
  Background counts = 13.8
  Rate = 0.008 +/- 0.001

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 3.63'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 8.24"
[Sun Jun  9 22:09:27 2013] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.654
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 8.24"
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src18.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src18.csv
[Sun Jun  9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Jun  9 22:09:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src18.csv
[Sun Jun  9 22:09:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Jun  9 22:09:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:26 2013] Warning, spatial fit 18 centroid is now closest to src. 7
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:26 2013] Source is confused with source 7
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 8.24"
[Sun Jun  9 22:11:07 2013] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.654
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 8.24"
[Sun Jun  9 22:11:07 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src18.ximg exists
[Sun Jun  9 22:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src18.csv
[Sun Jun  9 22:11:07 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Jun  9 22:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src18.csv
[Sun Jun  9 22:11:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Jun  9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Jun  9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Jun  9 22:11:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:12:09 2013] Warning, spatial fit 18 centroid is now closest to src. 7
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:44 2013] XMMSAS src. selection expression = ellipse(27036.091064, 21710.804550, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src108_src.reg
[Mon Jun 10 04:28:44 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (274, 213) - (349, 288)
[Mon Jun 10 04:28:44 2013] XMMSAS bgd. selection expression = annulus(27036.091064, 21710.804550, 1087.500000, 2175.000000, X, Y) && !ellipse(26944.144745, 21709.781036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28687.074000, 23361.034880, 1086.208031, 1086.208031, 0.000000, X, Y) && !ellipse(28406.510986, 23252.167206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26962.878400, 23048.459400, 351.863210, 351.863210, 0.000000, X, Y) && !ellipse(24217.073883, 19768.471405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25032.998901, 23540.893677, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:44 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src108.gif
[Mon Jun 10 04:39:31 2013] Mean detx,y = (349.82, -5860.24) 
[Mon Jun 10 04:39:32 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:39:54 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:39:54 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src108_src_b10.pi.gz
[Mon Jun 10 04:39:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src108_bgd.pi.gz
[Mon Jun 10 06:07:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 06:07:59 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:38 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:38 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src108_src_b10.pi.gz = 1337.00
[Mon Jun 10 07:19:38 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src108_bgd.pi.gz = 645.00
[Mon Jun 10 07:19:38 2013] Got source and background scale factors 1261532.000000, 8091246.000000
[Mon Jun 10 07:19:38 2013] User source parameters:
  Position = (311.3, 250.1) = 6 40 42.90 9 45 56.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1236.4 +/- 37.6
  Background aperture counts = 100.6
  Rate = 0.03 +/- 0.0009

[Mon Jun 10 07:19:38 2013] Updating counts from extracted products
[Mon Jun 10 07:19:38 2013] Set source signif. to 1236.44/10.03 = 123.30
[Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.0308, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src108.arf
[Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:03 2013] Updating source flux to 6.3e-13
[Mon Jun 10 07:20:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src108_pl.csv not found, spectral fit skipped or did not complete