[Sun Jun 9 22:08:15 2013] Detection parameters: Position = (230.8, 270.1) = 6 41 6.59 9 47 27.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 132.6 +/- 15.0 Background counts = 11.7 Rate = 0.006 +/- 0.0007 [Sun Jun 9 22:08:17 2013] Off-axis axis estimate = 5.32' [Sun Jun 9 22:09:27 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 9.09" [Sun Jun 9 22:09:27 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.119 [Sun Jun 9 22:09:27 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 9.09" [Sun Jun 9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src29.ximg exists [Sun Jun 9 22:09:28 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src29_1.ximg exists [Sun Jun 9 22:09:28 2013] Fit fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src29 appears to have run properly [Sun Jun 9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Sun Jun 9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src29.csv [Sun Jun 9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Sun Jun 9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src29.csv [Sun Jun 9 22:09:29 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:10:26 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 101 at 13.009836 pixels away [Sun Jun 9 22:10:26 2013] Source 101 is offset by 4.665777 and -7.278173 pixels which is larger than 2 X fitted extent = 3.729559 x 3.729559, not incorporating fit results [Sun Jun 9 22:10:26 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 22:10:26 2013] Assessing source extent using major [Sun Jun 9 22:10:26 2013] Source does appear to be extended [Sun Jun 9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 22:11:07 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 9.09" [Sun Jun 9 22:11:07 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.119 [Sun Jun 9 22:11:07 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 9.09" [Sun Jun 9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src29.ximg exists [Sun Jun 9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src29.csv [Sun Jun 9 22:11:08 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src29_1.ximg exists [Sun Jun 9 22:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src29.csv [Sun Jun 9 22:11:08 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Sun Jun 9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src29.csv [Sun Jun 9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Sun Jun 9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src29.csv [Sun Jun 9 22:11:09 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 22:12:09 2013] Spatial fit model total counts = 255.523000, observed total counts = 216.000000 [Sun Jun 9 22:12:09 2013] Poor agreement between spatial fit and data for source 101 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 22:12:09 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 22:12:09 2013] Assessing source extent using major [Sun Jun 9 22:12:09 2013] Source does appear to be extended [Sun Jun 9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jun 10 04:28:44 2013] XMMSAS src. selection expression = ellipse(20031.486572, 23447.210968, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jun 10 04:28:44 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src101_src.reg [Mon Jun 10 04:28:44 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (193, 233) - (268, 308) [Mon Jun 10 04:28:44 2013] XMMSAS bgd. selection expression = annulus(20031.486572, 23447.210968, 1087.500000, 2175.000000, X, Y) && !ellipse(21522.439699, 24542.797879, 444.825844, 368.177229, 50.880357, X, Y) && !ellipse(17437.546844, 22477.323456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20815.468933, 25464.459747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20715.907990, 24563.095886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20307.904327, 24419.458801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22189.450257, 22012.218764, 459.636012, 364.864736, 0.000000, X, Y) [Mon Jun 10 04:28:44 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src101.gif [Mon Jun 10 04:43:14 2013] Mean detx,y = (7223.54, -3842.93) [Mon Jun 10 04:43:15 2013] Setting backscal keywords in source and bgd. spectrum [Mon Jun 10 04:43:34 2013] Binned source spectrum to 10 counts/bin [Mon Jun 10 04:43:34 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src101_src_b10.pi.gz [Mon Jun 10 04:43:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src101_bgd.pi.gz [Mon Jun 10 06:24:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Jun 10 06:24:09 2013] rmf not generated due to insufficient counts [Mon Jun 10 07:19:41 2013] Updating aperture counts using extracted products [Mon Jun 10 07:19:41 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src101_src_b10.pi.gz = 182.00 [Mon Jun 10 07:19:41 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src101_bgd.pi.gz = 601.00 [Mon Jun 10 07:19:41 2013] Got source and background scale factors 1098450.000000, 8224674.000000 [Mon Jun 10 07:19:41 2013] User source parameters: Position = (230.8, 270.1) = 6 41 6.59 9 47 27.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 101.7 +/- 14.5 Background aperture counts = 80.3 Rate = 0.003 +/- 0.0004 [Mon Jun 10 07:19:41 2013] Updating counts from extracted products [Mon Jun 10 07:19:41 2013] Set source signif. to 101.73/8.96 = 11.36 [Mon Jun 10 07:20:03 2013] Calculating source flux in energy range 0.30-8.00 [Mon Jun 10 07:20:03 2013] Using photon index=1.80, rate=0.00253, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src101.arf [Mon Jun 10 07:20:03 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jun 10 07:20:03 2013] Updating source flux to 7e-14 [Mon Jun 10 07:20:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src101_pl.csv not found, spectral fit skipped or did not complete