[Sun Jun  9 22:08:12 2013] Detection parameters:
  Position = (314.6, 344.9) = 6 40 41.94 9 52 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6064.3 +/- 570.6
  Background counts = 17.6
  Rate = 0.2 +/- 0.02

[Sun Jun  9 22:08:17 2013] Off-axis axis estimate = 3.57'
[Sun Jun  9 22:09:27 2013] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:27 2013] Initial guess for spatial extent in simple fitting = 8.21"
[Sun Jun  9 22:09:27 2013] source mask rpix=1.9, npix_max = 22, mask sum = 12, frac = 0.526
[Sun Jun  9 22:09:27 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.21"
[Sun Jun  9 22:09:27 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jun  9 22:09:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src2.csv
[Sun Jun  9 22:09:27 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jun  9 22:09:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src2.csv
[Sun Jun  9 22:09:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun  9 22:09:29 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jun  9 22:09:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun Jun  9 22:09:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:26 2013] Spatial fit model total counts = 868.651000, observed total counts = 506.000000
[Sun Jun  9 22:10:26 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:10:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:26 2013] Assessing source extent using major
[Sun Jun  9 22:10:26 2013] Source does appear to be extended
[Sun Jun  9 22:10:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:07 2013] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:07 2013] Initial guess for spatial extent in simple fitting = 8.21"
[Sun Jun  9 22:11:07 2013] source mask rpix=1.9, npix_max = 22, mask sum = 12, frac = 0.526
[Sun Jun  9 22:11:07 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.21"
[Sun Jun  9 22:11:07 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun  9 22:11:07 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src2.csv
[Sun Jun  9 22:11:07 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun  9 22:11:07 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src2.csv
[Sun Jun  9 22:11:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun  9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun  9 22:11:09 2013] fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun  9 22:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun  9 22:11:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:12:08 2013] Warning, spatial fit 2 centroid is now closest to src. 52
[Sun Jun  9 22:12:09 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:12:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:12:09 2013] Assessing source extent using major
[Sun Jun  9 22:12:09 2013] Source does appear to be extended
[Sun Jun  9 22:12:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 04:28:43 2013] Counts = 6064.262207, rescaling region sizes by 2.000000
[Mon Jun 10 04:28:43 2013] XMMSAS src. selection expression = ellipse(27319.767670, 29959.711090, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:43 2013] Writing source region out to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 10 04:28:43 2013] Extracting stamp from image fullrun_mos2_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (240, 270) - (390, 420)
[Mon Jun 10 04:28:43 2013] XMMSAS bgd. selection expression = annulus(27319.767670, 29959.711090, 4350.000000, 8700.000000, X, Y) && !ellipse(22408.291640, 31006.267200, 398.997611, 398.997611, 0.000000, X, Y) && !ellipse(20714.416800, 28727.621000, 422.079212, 422.079212, 0.000000, X, Y) && !ellipse(26125.217016, 25650.859531, 434.320159, 372.440095, 15.504462, X, Y) && !ellipse(23064.323883, 31520.626709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26944.144745, 21709.781036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28687.074000, 23361.034880, 1086.208031, 1086.208031, 0.000000, X, Y) && !ellipse(21366.439660, 28750.758600, 297.491209, 297.491209, 0.000000, X, Y) && !ellipse(28671.445440, 32453.577200, 485.794414, 356.140810, 7.652770, X, Y) && !ellipse(21522.439699, 24542.797879, 444.825844, 368.177229, 50.880357, X, Y) && !ellipse(21426.215840, 29877.284000, 379.489611, 379.489611, 0.000000, X, Y) && !ellipse(22187.169600, 32912.013000, 439.059213, 334.354410, 332.515200, X, Y) && !ellipse(27804.512299, 27526.995361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28406.510986, 23252.167206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18245.731800, 29638.315600, 588.301617, 588.301617, 0.000000, X, Y) && !ellipse(27036.091064, 21710.804550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22087.399800, 28702.226000, 321.129609, 321.129609, 0.000000, X, Y) && !ellipse(32762.245850, 32985.114319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20815.468933, 25464.459747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22011.990000, 27876.654000, 1341.736039, 1341.736039, 0.000000, X, Y) && !ellipse(26459.025800, 35801.268200, 580.921617, 580.921617, 0.000000, X, Y) && !ellipse(22668.320953, 34306.371063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18120.031418, 32677.465454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26948.404200, 27686.150200, 311.623209, 311.623209, 0.000000, X, Y) && !ellipse(20031.486572, 23447.210968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32137.862610, 36838.252136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22275.907623, 30322.119934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31244.785095, 24586.709717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26582.264920, 24362.342800, 321.896009, 321.896009, 0.000000, X, Y) && !ellipse(19270.099838, 33957.593140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28905.164220, 24572.227400, 395.830411, 395.830411, 0.000000, X, Y) && !ellipse(21163.772934, 30848.155579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33179.460520, 31914.178200, 268.474408, 268.474408, 0.000000, X, Y) && !ellipse(22025.677750, 29264.889923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25794.822388, 25103.858978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24783.151400, 32463.025000, 453.273613, 274.656808, 138.917400, X, Y) && !ellipse(27509.316000, 24299.465600, 321.885609, 321.885609, 0.000000, X, Y) && !ellipse(25532.329240, 30892.476400, 410.477612, 278.386408, 102.422200, X, Y) && !ellipse(26962.878400, 23048.459400, 351.863210, 351.863210, 0.000000, X, Y) && !ellipse(20715.907990, 24563.095886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18959.841080, 30132.123383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23903.290200, 23010.330600, 402.190412, 402.190412, 0.000000, X, Y) && !ellipse(30053.463305, 28286.639000, 366.505611, 366.505611, 0.000000, X, Y) && !ellipse(34056.617790, 24724.297800, 530.417615, 283.088008, 75.918899, X, Y) && !ellipse(27393.232330, 26340.213196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33058.431200, 26224.221400, 373.921611, 373.921611, 0.000000, X, Y) && !ellipse(20941.434200, 36156.610020, 748.762422, 748.762422, 0.000000, X, Y) && !ellipse(20307.904327, 24419.458801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20544.736923, 27452.288147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28974.663800, 27417.423200, 286.916808, 286.916808, 0.000000, X, Y) && !ellipse(23273.694240, 27977.562600, 310.491209, 310.491209, 0.000000, X, Y) && !ellipse(28435.639313, 35865.773315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27556.476807, 31480.368500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32227.355564, 24611.872600, 310.377609, 310.377609, 0.000000, X, Y) && !ellipse(23436.800380, 27485.245600, 305.635209, 305.635209, 0.000000, X, Y) && !ellipse(24300.688420, 29092.094000, 448.136013, 448.136013, 0.000000, X, Y) && !ellipse(30798.891033, 26765.034089, 604.000858, 458.505122, 175.390720, X, Y) && !ellipse(24783.779266, 33552.958710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22189.450257, 22012.218764, 459.636012, 364.864736, 0.000000, X, Y) && !ellipse(24333.510193, 29523.452606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32406.880300, 30312.784800, 320.696009, 320.696009, 0.000000, X, Y) && !ellipse(30724.384000, 21898.843400, 505.097615, 505.097615, 0.000000, X, Y) && !ellipse(22548.669403, 33331.765564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21018.334412, 39257.493591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25970.757412, 31827.471493, 372.966533, 255.951469, 277.425242, X, Y) && !ellipse(21948.158859, 37112.182129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21537.695312, 39245.622955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36322.087891, 21680.473495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.931200, 35683.065800, 515.680310, 515.680310, 0.000000, X, Y) && !ellipse(37008.810000, 36516.069800, 1057.960030, 368.789611, 38.217294, X, Y) && !ellipse(19913.587341, 36740.257660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28593.618680, 26322.536000, 267.881608, 267.881608, 0.000000, X, Y) && !ellipse(22156.193100, 38202.210800, 520.928815, 520.928815, 0.000000, X, Y) && !ellipse(18850.222885, 35759.627899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24949.543365, 29447.287781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19277.727737, 28726.011902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27162.595245, 31065.642303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25032.998901, 23540.893677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21308.980469, 27791.415039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17955.679794, 33297.836945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31565.762207, 32274.405457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24320.686401, 34518.199921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24079.386719, 25282.908844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25632.289459, 31305.194977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29744.178467, 24917.568848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22756.430756, 38271.835205, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 04:28:43 2013] Writing fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src1.gif
[Mon Jun 10 04:29:35 2013] Mean detx,y = (-524.40, 2434.66) 
[Mon Jun 10 04:29:37 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 04:31:30 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 04:31:30 2013] Setting source spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 10 04:31:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 10 05:14:20 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 05:14:20 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:33 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:33 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 852.00
[Mon Jun 10 07:19:33 2013] Total counts from fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 8983.00
[Mon Jun 10 07:19:33 2013] Got source and background scale factors 4902996.000000, 107848596.000000
[Mon Jun 10 07:19:33 2013] User source parameters:
  Position = (314.6, 344.9) = 6 40 41.94 9 52 59.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 443.6 +/- 30.2
  Background aperture counts = 408.4
  Rate = 0.01 +/- 0.0008

[Mon Jun 10 07:19:33 2013] Updating counts from extracted products
[Mon Jun 10 07:19:33 2013] Set source signif. to 443.62/20.21 = 21.95
[Mon Jun 10 07:20:02 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:20:02 2013] Using photon index=1.80, rate=0.011, arf fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src1.arf
[Mon Jun 10 07:20:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:20:02 2013] Updating source flux to 2.1e-13
[Mon Jun 10 07:20:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:47 2013] xmm0011420101/analysis//spectral/fullrun_mos2_xmm0011420101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete