[Sun Jun  9 22:08:11 2013] Detection parameters:
  Position = (304.2, 245.9) = 6 40 44.99 9 45 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.0 +/- 18.4
  Background counts = 15.5
  Rate = 0.007 +/- 0.0006

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 3.83'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 8.34"
[Sun Jun  9 22:09:22 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.855
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 8.34"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src28.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src28.csv
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src28.csv
[Sun Jun  9 22:09:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Jun  9 22:09:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Jun  9 22:09:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Jun  9 22:09:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:11 2013] Source 97 is offset by 6.379430 and 5.150054 pixels which is larger than
2 X fitted extent = 0.777761 x 0.875848, not incorporating fit results
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 8.34"
[Sun Jun  9 22:11:03 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.855
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 8.34"
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src27.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src27.csv
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src27.csv
[Sun Jun  9 22:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Jun  9 22:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Jun  9 22:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun Jun  9 22:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:50 2013] Spatial fit model total counts = 1014.830000, observed total counts = 1407.000000
[Sun Jun  9 22:11:50 2013] Poor agreement between spatial fit and data for source 97
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:11:50 2013] Warning, spatial fit 27 centroid is now closest to src. 6
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:19 2013] XMMSAS src. selection expression = ellipse(26417.352417, 21347.714691, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 01:44:19 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src97_src.reg
[Mon Jun 10 01:44:19 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (267, 208) - (342, 283)
[Mon Jun 10 01:44:19 2013] XMMSAS bgd. selection expression = annulus(26417.352417, 21347.714691, 1087.500000, 2175.000000, X, Y) && !ellipse(26963.051208, 21806.856873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28653.134000, 23339.354400, 697.368020, 697.368020, 0.000000, X, Y) && !ellipse(28397.987560, 23225.195000, 348.684010, 348.684010, 0.000000, X, Y) && !ellipse(24114.126400, 20360.703400, 300.571209, 300.571209, 0.000000, X, Y) && !ellipse(24172.392000, 19736.078000, 306.080809, 306.080809, 0.000000, X, Y) && !ellipse(24645.446930, 20216.947006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26975.420400, 23070.210400, 412.822412, 412.822412, 0.000000, X, Y)
[Mon Jun 10 01:44:19 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src97.gif
[Mon Jun 10 02:01:30 2013] Mean detx,y = (-5829.33, -864.71) 
[Mon Jun 10 02:01:32 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:02:01 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:02:01 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Mon Jun 10 02:02:01 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src97_bgd.pi.gz
[Mon Jun 10 03:41:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 03:41:46 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:16 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:16 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src97_src_b10.pi.gz = 617.00
[Mon Jun 10 07:19:16 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src97_bgd.pi.gz = 620.00
[Mon Jun 10 07:19:16 2013] Got source and background scale factors 1209040.000000, 8298445.000000
[Mon Jun 10 07:19:16 2013] User source parameters:
  Position = (304.2, 245.9) = 6 40 44.99 9 45 41.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 526.7 +/- 25.9
  Background aperture counts = 90.3
  Rate = 0.01 +/- 0.0006

[Mon Jun 10 07:19:16 2013] Updating counts from extracted products
[Mon Jun 10 07:19:16 2013] Set source signif. to 526.67/9.50 = 55.41
[Mon Jun 10 07:19:31 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:31 2013] Using photon index=1.80, rate=0.0131, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src97.arf
[Mon Jun 10 07:19:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:31 2013] Updating source flux to 2.4e-13
[Mon Jun 10 07:20:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src97_pl.csv not found, spectral fit skipped or did not complete