[Sun Jun  9 22:08:10 2013] Detection parameters:
  Position = (201.1, 259.0) = 6 41 15.34 9 46 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.5 +/- 17.5
  Background counts = 12.0
  Rate = 0.005 +/- 0.0004

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 7.61'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 10.24"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.106
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 10.24"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src40.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src40.csv
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src40_1.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src40.csv
[Sun Jun  9 22:09:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Sun Jun  9 22:09:26 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Sun Jun  9 22:10:11 2013] Warning, spatial fit 40 centroid is now closest to src. 98
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 10.24"
[Sun Jun  9 22:11:03 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.106
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 10.24"
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src39.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src39.csv
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src39_1.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src39.csv
[Sun Jun  9 22:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sun Jun  9 22:11:06 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sun Jun  9 22:11:50 2013] Spatial fit model total counts = 288.996000, observed total counts = 289.000000
[Sun Jun  9 22:11:50 2013] Offset between fit and detection position for source 95 = 0.095249 pixels
[Sun Jun  9 22:11:50 2013] 291.506000 total counts/ 156.021000 bgd. counts: snr = 10.846751
Spatial fit parameters:
  Offset between fit and detection position for source 95 = 0.095249 pixels
  Position = (201.2, 259.0) = 6 41 15.31 9 46 38.3
  Extent = 5.6 (4.8-6.7)", rotation angle = 0
  Source counts = 135.5 +/- 17.1
  Background counts = 156.0
  Rate = 0.003 +/- 0.0004
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:19 2013] XMMSAS src. selection expression = ellipse(17454.284740, 22487.567800, 334.924810, 334.924810, 0.000000, X, Y)
[Mon Jun 10 01:44:19 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src95_src.reg
[Mon Jun 10 01:44:19 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (182, 240) - (220, 278)
[Mon Jun 10 01:44:19 2013] XMMSAS bgd. selection expression = annulus(17454.284740, 22487.567800, 558.208016, 1116.416032, X, Y) && !ellipse(15883.214600, 21152.472600, 834.536429, 834.536429, 0.000000, X, Y) && !ellipse(15909.034531, 23530.031952, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 01:44:19 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src95.gif
[Mon Jun 10 02:06:49 2013] Mean detx,y = (-4397.20, -9991.04) 
[Mon Jun 10 02:06:51 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:07:03 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:07:03 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Mon Jun 10 02:07:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Mon Jun 10 07:19:17 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:17 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src95_src_b10.pi.gz = 166.00
[Mon Jun 10 07:19:18 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src95_bgd.pi.gz = 197.00
[Mon Jun 10 07:19:18 2013] Got source and background scale factors 355200.000000, 2781600.000000
[Mon Jun 10 07:19:18 2013] User source parameters:
  Position = (201.2, 259.0) = 6 41 15.31 9 46 38.3
  Extent = 5.6 (4.8-6.7)", rotation angle = 0
  Source aperture counts = 140.8 +/- 13.9
  Background aperture counts = 25.2
  Rate = 0.004 +/- 0.0003

[Mon Jun 10 07:19:31 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:31 2013] Using photon index=1.80, rate=0.00337, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src95.arf
[Mon Jun 10 07:19:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:31 2013] Updating source flux to 1.1e-13
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src95_pl.csv not found, spectral fit skipped or did not complete