[Sun Jun  9 22:08:10 2013] Detection parameters:
  Position = (234.2, 281.2) = 6 41 5.59 9 48 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.5 +/- 10.9
  Background counts = 15.3
  Rate = 0.003 +/- 0.0005

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 4.82'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 8.84"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.780
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 8.84"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src67.ximg exists
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src67_1.ximg exists
[Sun Jun  9 22:09:24 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src67 appears to have run properly
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sun Jun  9 22:09:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sun Jun  9 22:09:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Sun Jun  9 22:09:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:11 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 11.730170 pixels away
[Sun Jun  9 22:10:11 2013] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 13.270602 pixels away
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 8.84"
[Sun Jun  9 22:11:03 2013] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.780
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 66 for pass 1, mean size = 8.84"
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src66.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src66.csv
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src66_1.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src66.csv
[Sun Jun  9 22:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Sun Jun  9 22:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src66.csv
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Sun Jun  9 22:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src66.csv
[Sun Jun  9 22:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:51 2013] Source 85 is offset by -3.658194 and 0.563919 pixels which is larger than
2 X fitted extent = 1.133264 x 1.133264, not incorporating fit results
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:20 2013] XMMSAS src. selection expression = ellipse(20329.175095, 24416.463928, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 01:44:20 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src85_src.reg
[Mon Jun 10 01:44:20 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (197, 244) - (272, 319)
[Mon Jun 10 01:44:20 2013] XMMSAS bgd. selection expression = annulus(20329.175095, 24416.463928, 1087.500000, 2175.000000, X, Y) && !ellipse(21511.245911, 24561.309052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20825.650970, 25466.708557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20044.776340, 23452.259400, 549.563216, 549.563216, 0.000000, X, Y) && !ellipse(22210.252600, 22052.772240, 387.704811, 160.924005, 52.287696, X, Y) && !ellipse(21161.833435, 24053.162994, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 01:44:20 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src85.gif
[Mon Jun 10 02:16:58 2013] Mean detx,y = (-2582.62, -7042.96) 
[Mon Jun 10 02:17:00 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:17:29 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:17:29 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Mon Jun 10 02:17:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Mon Jun 10 04:16:24 2013] Not generating rmf since there are only 70 counts
[Mon Jun 10 04:16:24 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:21 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:21 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src85_src_b10.pi.gz = 173.00
[Mon Jun 10 07:19:22 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src85_bgd.pi.gz = 461.00
[Mon Jun 10 07:19:22 2013] Got source and background scale factors 1003844.000000, 7036443.000000
[Mon Jun 10 07:19:22 2013] User source parameters:
  Position = (234.2, 281.2) = 6 41 5.59 9 48 16.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 107.2 +/- 14.2
  Background aperture counts = 65.8
  Rate = 0.003 +/- 0.0004

[Mon Jun 10 07:19:22 2013] Updating counts from extracted products
[Mon Jun 10 07:19:22 2013] Set source signif. to 107.23/8.11 = 13.22
[Mon Jun 10 07:19:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:32 2013] Using photon index=1.80, rate=0.00267, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src85.arf
[Mon Jun 10 07:19:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:32 2013] Updating source flux to 7.5e-14
[Mon Jun 10 07:20:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src85_pl.csv not found, spectral fit skipped or did not complete