[Sun Jun  9 22:08:10 2013] Detection parameters:
  Position = (370.8, 283.7) = 6 40 25.40 9 48 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.1 +/- 14.5
  Background counts = 16.5
  Rate = 0.003 +/- 0.0004

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 5.35'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 9.10"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.930
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 9.10"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src59.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src59.csv
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src59_1.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src59.csv
[Sun Jun  9 22:09:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Sun Jun  9 22:09:26 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 235.872000, observed total counts = 236.000000
[Sun Jun  9 22:10:11 2013] Offset between fit and detection position for source 82 = 0.168907 pixels
[Sun Jun  9 22:10:11 2013] 233.070600 total counts/ 155.194000 bgd. counts: snr = 6.251288
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 0.168907 pixels
  Position = (370.9, 283.6) = 6 40 25.37 9 48 25.3
  Extent = 4.7 (3.3-6.8)", rotation angle = 0
  Source counts = 77.9 +/- 15.3
  Background counts = 155.2
  Rate = 0.002 +/- 0.0004
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 4.70"
[Sun Jun  9 22:11:03 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.901
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 58 for pass 1, mean size = 4.70"
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src58.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src58.csv
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src58_1.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src58.csv
[Sun Jun  9 22:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Sun Jun  9 22:11:06 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Sun Jun  9 22:11:51 2013] Warning, spatial fit 58 centroid is now closest to src. 81
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:20 2013] XMMSAS src. selection expression = ellipse(32217.474080, 24625.690000, 282.042608, 282.042608, 0.000000, X, Y)
[Mon Jun 10 01:44:20 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src82_src.reg
[Mon Jun 10 01:44:20 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (355, 267) - (387, 300)
[Mon Jun 10 01:44:20 2013] XMMSAS bgd. selection expression = annulus(32217.474080, 24625.690000, 470.071014, 940.142027, X, Y) && !ellipse(31240.229000, 24601.658200, 303.174855, 303.174855, 0.000000, X, Y) && !ellipse(33067.460052, 26111.710754, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 01:44:20 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src82.gif
[Mon Jun 10 02:14:07 2013] Mean detx,y = (-3007.98, 4866.76) 
[Mon Jun 10 02:14:08 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:14:16 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:14:16 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Mon Jun 10 02:14:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Mon Jun 10 04:15:32 2013] Not generating rmf since there are only 77 counts
[Mon Jun 10 04:15:32 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:20 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:20 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src82_src_b10.pi.gz = 98.00
[Mon Jun 10 07:19:20 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src82_bgd.pi.gz = 138.00
[Mon Jun 10 07:19:20 2013] Got source and background scale factors 249600.000000, 1925580.000000
[Mon Jun 10 07:19:20 2013] User source parameters:
  Position = (370.9, 283.6) = 6 40 25.37 9 48 25.3
  Extent = 4.7 (3.3-6.8)", rotation angle = 0
  Source aperture counts = 80.1 +/- 10.9
  Background aperture counts = 17.9
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 07:19:31 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:31 2013] Using photon index=1.80, rate=0.00194, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src82.arf
[Mon Jun 10 07:19:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:31 2013] Updating source flux to 4.2e-14
[Mon Jun 10 07:20:10 2013] Source 82 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src82_pl.csv not found, spectral fit skipped or did not complete