[Sun Jun  9 22:08:10 2013] Detection parameters:
  Position = (297.3, 289.2) = 6 40 47.02 9 48 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.6 +/- 21.8
  Background counts = 19.9
  Rate = 0.007 +/- 0.0006

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 0.68'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 6.77"
[Sun Jun  9 22:09:22 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.947
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 6.77"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src27.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src27.csv
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src27.csv
[Sun Jun  9 22:09:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Jun  9 22:09:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Jun  9 22:09:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun Jun  9 22:09:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:11 2013] Warning, spatial fit 27 centroid is now closest to src. 2
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:11 2013] Source is confused with source 2
[Sun Jun  9 22:11:03 2013] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 6.77"
[Sun Jun  9 22:11:03 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.947
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 6.77"
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src26.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src26.csv
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src26.csv
[Sun Jun  9 22:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sun Jun  9 22:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:50 2013] Spatial fit model total counts = -849.598000, observed total counts = 3389.000000
[Sun Jun  9 22:11:50 2013] Poor agreement between spatial fit and data for source 80
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:19 2013] XMMSAS src. selection expression = ellipse(25817.546783, 25110.395660, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 01:44:19 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src80_src.reg
[Mon Jun 10 01:44:19 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (260, 252) - (335, 327)
[Mon Jun 10 01:44:19 2013] XMMSAS bgd. selection expression = annulus(25817.546783, 25110.395660, 1087.500000, 2175.000000, X, Y) && !ellipse(26125.627900, 25657.410600, 451.660013, 398.148811, 204.701000, X, Y) && !ellipse(28653.134000, 23339.354400, 697.368020, 697.368020, 0.000000, X, Y) && !ellipse(27809.770934, 27545.972536, 592.113889, 494.585415, 350.625003, X, Y) && !ellipse(26948.429962, 27701.260864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23887.873720, 22991.620900, 354.371210, 354.371210, 0.000000, X, Y) && !ellipse(26571.107660, 24378.109400, 278.998408, 278.998408, 0.000000, X, Y) && !ellipse(27506.846400, 24293.534800, 373.421611, 373.421611, 0.000000, X, Y) && !ellipse(23451.514771, 27533.701965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26975.420400, 23070.210400, 412.822412, 412.822412, 0.000000, X, Y) && !ellipse(27392.195600, 26353.233800, 436.256813, 436.256813, 0.000000, X, Y)
[Mon Jun 10 01:44:19 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src80.gif
[Mon Jun 10 02:01:04 2013] Mean detx,y = (-1856.19, -1288.08) 
[Mon Jun 10 02:01:06 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:01:23 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:01:24 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Mon Jun 10 02:01:24 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Mon Jun 10 03:41:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 03:41:39 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:15 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:15 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src80_src_b10.pi.gz = 2119.00
[Mon Jun 10 07:19:15 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src80_bgd.pi.gz = 1290.00
[Mon Jun 10 07:19:16 2013] Got source and background scale factors 1349580.000000, 9924720.000000
[Mon Jun 10 07:19:16 2013] User source parameters:
  Position = (297.3, 289.2) = 6 40 47.02 9 48 48.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1943.6 +/- 47.0
  Background aperture counts = 175.4
  Rate = 0.05 +/- 0.001

[Mon Jun 10 07:19:16 2013] Updating counts from extracted products
[Mon Jun 10 07:19:16 2013] Set source signif. to 1943.58/13.24 = 146.75
[Mon Jun 10 07:19:31 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:31 2013] Using photon index=1.80, rate=0.0483, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src80.arf
[Mon Jun 10 07:19:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:31 2013] Updating source flux to 7.3e-13
[Mon Jun 10 07:20:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src80_pl.csv not found, spectral fit skipped or did not complete