[Sun Jun  9 22:08:10 2013] Detection parameters:
  Position = (380.6, 300.7) = 6 40 22.49 9 49 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.1 +/- 14.0
  Background counts = 15.5
  Rate = 0.004 +/- 0.0005

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 5.96'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 9.41"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.705
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 9.41"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src55.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src55.csv
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src55_1.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src55.csv
[Sun Jun  9 22:09:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sun Jun  9 22:09:26 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Sun Jun  9 22:10:11 2013] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 12.962704 pixels away
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 9.41"
[Sun Jun  9 22:11:03 2013] source mask rpix=2.2, npix_max = 28, mask sum = 20, frac = 0.705
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 9.41"
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src54.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src54.csv
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src54_1.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src54.csv
[Sun Jun  9 22:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Sun Jun  9 22:11:06 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Sun Jun  9 22:11:51 2013] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 12.962704 pixels away
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:19 2013] XMMSAS src. selection expression = ellipse(33067.460052, 26111.710754, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 01:44:19 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src77_src.reg
[Mon Jun 10 01:44:19 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (343, 263) - (418, 338)
[Mon Jun 10 01:44:19 2013] XMMSAS bgd. selection expression = annulus(33067.460052, 26111.710754, 1087.500000, 2175.000000, X, Y) && !ellipse(31240.229000, 24601.658200, 303.174855, 303.174855, 0.000000, X, Y) && !ellipse(32217.474080, 24625.690000, 376.056811, 376.056811, 0.000000, X, Y) && !ellipse(34070.054871, 24736.782593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30906.198620, 26726.800000, 406.587212, 406.587212, 0.000000, X, Y)
[Mon Jun 10 01:44:19 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src77.gif
[Mon Jun 10 02:12:19 2013] Mean detx,y = (-1562.82, 5747.01) 
[Mon Jun 10 02:12:22 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:13:01 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:13:02 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Mon Jun 10 02:13:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Mon Jun 10 04:11:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 04:11:28 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:20 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:20 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src77_src_b10.pi.gz = 178.00
[Mon Jun 10 07:19:20 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src77_bgd.pi.gz = 594.00
[Mon Jun 10 07:19:20 2013] Got source and background scale factors 1249258.000000, 8187491.000000
[Mon Jun 10 07:19:20 2013] User source parameters:
  Position = (380.6, 300.7) = 6 40 22.49 9 49 45.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 87.4 +/- 14.4
  Background aperture counts = 90.6
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 07:19:20 2013] Updating counts from extracted products
[Mon Jun 10 07:19:20 2013] Set source signif. to 87.37/9.52 = 9.18
[Mon Jun 10 07:19:31 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:31 2013] Using photon index=1.80, rate=0.00217, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src77.arf
[Mon Jun 10 07:19:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:31 2013] Updating source flux to 3.8e-14
[Mon Jun 10 07:20:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src77_pl.csv not found, spectral fit skipped or did not complete