[Sun Jun  9 22:08:10 2013] Detection parameters:
  Position = (333.7, 315.9) = 6 40 36.30 9 50 44.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.7 +/- 14.3
  Background counts = 18.7
  Rate = 0.003 +/- 0.0004

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 2.86'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 7.86"
[Sun Jun  9 22:09:22 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.940
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 71 for pass 0, mean size = 7.86"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src71.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src71.csv
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src71_1.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src71.csv
[Sun Jun  9 22:09:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sun Jun  9 22:09:26 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 279.384000, observed total counts = 275.000000
[Sun Jun  9 22:10:11 2013] Offset between fit and detection position for source 72 = 0.070359 pixels
[Sun Jun  9 22:10:11 2013] 275.161600 total counts/ 198.207000 bgd. counts: snr = 5.466069
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.070359 pixels
  Position = (333.8, 315.8) = 6 40 36.28 9 50 45.5
  Extent = 4.5 (3.8-5.3)", rotation angle = 0
  Source counts = 77.0 +/- 16.6
  Background counts = 198.2
  Rate = 0.002 +/- 0.0004
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 4.52"
[Sun Jun  9 22:11:03 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.949
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 4.52"
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src70.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src70.csv
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src70_1.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src70.csv
[Sun Jun  9 22:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Sun Jun  9 22:11:06 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Sun Jun  9 22:11:51 2013] Spatial fit model total counts = 285.477000, observed total counts = 284.000000
[Sun Jun  9 22:11:51 2013] Offset between fit and detection position for source 72 = 0.018410 pixels
[Sun Jun  9 22:11:51 2013] 280.575900 total counts/ 203.035000 bgd. counts: snr = 5.441835
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.018410 pixels
  Position = (333.8, 315.8) = 6 40 36.28 9 50 45.4
  Extent = 4.5 (3.7-5.4)", rotation angle = 0
  Source counts = 77.5 +/- 16.8
  Background counts = 203.0
  Rate = 0.002 +/- 0.0004
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:20 2013] XMMSAS src. selection expression = ellipse(28992.342200, 27427.292120, 269.263208, 269.263208, 0.000000, X, Y)
[Mon Jun 10 01:44:20 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src72_src.reg
[Mon Jun 10 01:44:20 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (318, 300) - (349, 331)
[Mon Jun 10 01:44:20 2013] XMMSAS bgd. selection expression = annulus(28992.342200, 27427.292120, 448.772013, 897.544026, X, Y) && !ellipse(27809.770934, 27545.972536, 592.113889, 494.585415, 350.625003, X, Y) && !ellipse(30076.153000, 28279.042400, 425.128012, 425.128012, 0.000000, X, Y) && !ellipse(28597.495000, 26329.436000, 324.331209, 324.331209, 0.000000, X, Y)
[Mon Jun 10 01:44:20 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src72.gif
[Mon Jun 10 02:19:46 2013] Mean detx,y = (-45.06, 1787.26) 
[Mon Jun 10 02:19:48 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:19:56 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:19:56 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Mon Jun 10 02:19:56 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Mon Jun 10 04:17:15 2013] Not generating rmf since there are only 77 counts
[Mon Jun 10 04:17:15 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:22 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:22 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src72_src_b10.pi.gz = 99.00
[Mon Jun 10 07:19:22 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src72_bgd.pi.gz = 172.00
[Mon Jun 10 07:19:22 2013] Got source and background scale factors 225600.000000, 1732800.000000
[Mon Jun 10 07:19:22 2013] User source parameters:
  Position = (333.8, 315.8) = 6 40 36.28 9 50 45.4
  Extent = 4.5 (3.7-5.4)", rotation angle = 0
  Source aperture counts = 76.6 +/- 11.0
  Background aperture counts = 22.4
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 07:19:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:32 2013] Using photon index=1.80, rate=0.00193, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src72.arf
[Mon Jun 10 07:19:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:32 2013] Updating source flux to 3.5e-14
[Mon Jun 10 07:20:10 2013] Source 72 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src72_pl.csv not found, spectral fit skipped or did not complete