[Sun Jun  9 22:08:09 2013] Detection parameters:
  Position = (279.4, 333.0) = 6 40 52.29 9 52 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.4 +/- 15.3
  Background counts = 17.4
  Rate = 0.003 +/- 0.0005

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 2.86'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 7.86"
[Sun Jun  9 22:09:22 2013] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.705
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 7.86"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src60.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src60.csv
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src60_1.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src60.csv
[Sun Jun  9 22:09:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Sun Jun  9 22:09:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Sun Jun  9 22:09:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Sun Jun  9 22:09:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:11 2013] Source 63 is offset by 7.035445 and 4.582943 pixels which is larger than
2 X fitted extent = 2.314989 x 2.314989, not incorporating fit results
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:11 2013] Source is confused with source 61
[Sun Jun  9 22:11:03 2013] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 7.86"
[Sun Jun  9 22:11:03 2013] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.705
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 7.86"
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src59.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src59.csv
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src59_1.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src59.csv
[Sun Jun  9 22:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sun Jun  9 22:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sun Jun  9 22:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sun Jun  9 22:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:51 2013] Source 63 is offset by 7.042640 and 4.526782 pixels which is larger than
2 X fitted extent = 2.164285 x 2.164285, not incorporating fit results
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:20 2013] XMMSAS src. selection expression = ellipse(24260.767700, 28922.500000, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 01:44:20 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src63_src.reg
[Mon Jun 10 01:44:20 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (242, 296) - (317, 370)
[Mon Jun 10 01:44:20 2013] XMMSAS bgd. selection expression = annulus(24260.767700, 28922.500000, 1087.500000, 2175.000000, X, Y) && !ellipse(23071.625214, 31523.730438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22397.192150, 31003.804800, 639.018418, 639.018418, 0.000000, X, Y) && !ellipse(22086.232330, 28685.528015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22255.856842, 30335.724304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22020.115600, 29289.738000, 333.501610, 333.501610, 0.000000, X, Y) && !ellipse(26948.429962, 27701.260864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21895.873367, 31075.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23278.138820, 27974.313000, 258.655207, 258.655207, 0.000000, X, Y) && !ellipse(23451.514771, 27533.701965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25551.726200, 30899.170400, 327.323209, 327.323209, 0.000000, X, Y) && !ellipse(24350.779800, 29446.727600, 591.066417, 591.066417, 0.000000, X, Y) && !ellipse(24947.602600, 29449.044000, 379.833611, 379.833611, 0.000000, X, Y)
[Mon Jun 10 01:44:20 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src63.gif
[Mon Jun 10 02:14:19 2013] Mean detx,y = (1822.52, -2809.67) 
[Mon Jun 10 02:14:21 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:14:32 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:14:33 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Mon Jun 10 02:14:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Mon Jun 10 04:15:37 2013] Not generating rmf since there are only 96 counts
[Mon Jun 10 04:15:37 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:20 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:20 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src63_src_b10.pi.gz = 231.00
[Mon Jun 10 07:19:20 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src63_bgd.pi.gz = 909.00
[Mon Jun 10 07:19:21 2013] Got source and background scale factors 1269236.000000, 7266320.000000
[Mon Jun 10 07:19:21 2013] User source parameters:
  Position = (279.4, 333.0) = 6 40 52.29 9 52 8.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 72.2 +/- 16.2
  Background aperture counts = 158.8
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 07:19:21 2013] Updating counts from extracted products
[Mon Jun 10 07:19:21 2013] Set source signif. to 72.22/12.60 = 5.73
[Mon Jun 10 07:19:31 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:31 2013] Using photon index=1.80, rate=0.0018, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src63.arf
[Mon Jun 10 07:19:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:31 2013] Updating source flux to 2.9e-14
[Mon Jun 10 07:20:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete