[Sun Jun  9 22:08:09 2013] Detection parameters:
  Position = (253.7, 337.1) = 6 40 59.85 9 52 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.1 +/- 18.7
  Background counts = 21.0
  Rate = 0.006 +/- 0.0006

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 4.28'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 8.57"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.024
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 8.57"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src31.ximg exists
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Jun  9 22:09:24 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src31 appears to have run properly
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Jun  9 22:09:25 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 1328.730000, observed total counts = 1334.000000
[Sun Jun  9 22:10:11 2013] Offset between fit and detection position for source 62 = 0.110870 pixels
[Sun Jun  9 22:10:11 2013] 605.718000 total counts/ 482.945000 bgd. counts: snr = 5.586683
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.110870 pixels
  Position = (253.6, 337.2) = 6 40 59.87 9 52 18.2
  Extent = 4.6 (3.9-5.2)", rotation angle = 0
  Source counts = 122.8 +/- 24.6
  Background counts = 482.9
  Rate = 0.003 +/- 0.0006
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:11 2013] Source is confused with source 66
[Sun Jun  9 22:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 4.58"
[Sun Jun  9 22:11:03 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.932
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 4.58"
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src30.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src30.csv
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src30_1.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src30.csv
[Sun Jun  9 22:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sun Jun  9 22:11:06 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sun Jun  9 22:11:50 2013] Spatial fit model total counts = 1102.200000, observed total counts = 1095.000000
[Sun Jun  9 22:11:50 2013] Offset between fit and detection position for source 62 = 0.063276 pixels
[Sun Jun  9 22:11:50 2013] Warning, changing simple spatial fit ID from 30 to 20
[Sun Jun  9 22:11:50 2013] 909.170700 total counts/ 816.109000 bgd. counts: snr = 3.257594
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.063276 pixels
  Position = (253.7, 337.2) = 6 40 59.87 9 52 18.5
  Extent = 4.2 (3.4-5.1)", rotation angle = 0
  Source counts = 93.1 +/- 30.2
  Background counts = 816.1
  Rate = 0.002 +/- 0.0008
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:19 2013] XMMSAS src. selection expression = ellipse(22020.115600, 29289.738000, 250.126207, 250.126207, 0.000000, X, Y)
[Mon Jun 10 01:44:19 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src62_src.reg
[Mon Jun 10 01:44:19 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (239, 323) - (268, 352)
[Mon Jun 10 01:44:19 2013] XMMSAS bgd. selection expression = annulus(22020.115600, 29289.738000, 416.877012, 833.754024, X, Y) && !ellipse(21450.502345, 29878.297957, 417.536329, 303.305224, 94.252977, X, Y) && !ellipse(21360.282000, 28746.102000, 251.110407, 251.110407, 0.000000, X, Y) && !ellipse(22086.232330, 28685.528015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22255.856842, 30335.724304, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 01:44:19 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src62.gif
[Mon Jun 10 02:02:52 2013] Mean detx,y = (2159.33, -5088.42) 
[Mon Jun 10 02:02:54 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:03:04 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:03:04 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Mon Jun 10 02:03:04 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Mon Jun 10 03:45:51 2013] Not generating rmf since there are only 93 counts
[Mon Jun 10 03:45:51 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:16 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:16 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 166.00
[Mon Jun 10 07:19:16 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src62_bgd.pi.gz = 82.00
[Mon Jun 10 07:19:16 2013] Got source and background scale factors 196800.000000, 219200.000000
[Mon Jun 10 07:19:16 2013] User source parameters:
  Position = (253.7, 337.2) = 6 40 59.87 9 52 18.5
  Extent = 4.2 (3.4-5.1)", rotation angle = 0
  Source aperture counts = 92.4 +/- 13.9
  Background aperture counts = 73.6
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 07:19:31 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:31 2013] Using photon index=1.80, rate=0.00231, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src62.arf
[Mon Jun 10 07:19:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:31 2013] Updating source flux to 5.9e-14
[Mon Jun 10 07:20:10 2013] Flag c found in src. 62 procflags, skipping spectral fitting
[Mon Jun 10 07:20:10 2013] Source 62 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete