[Sun Jun  9 22:08:09 2013] Detection parameters:
  Position = (287.4, 339.1) = 6 40 49.94 9 52 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.8 +/- 12.0
  Background counts = 21.3
  Rate = 0.002 +/- 0.0003

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 3.06'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 7.96"
[Sun Jun  9 22:09:22 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.922
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 92 for pass 0, mean size = 7.96"
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src92.ximg exists
[Sun Jun  9 22:09:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src92.csv
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src92_1.ximg exists
[Sun Jun  9 22:09:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src92.csv
[Sun Jun  9 22:09:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Sun Jun  9 22:09:26 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src92 appears to have run properly
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 348.521000, observed total counts = 381.000000
[Sun Jun  9 22:10:11 2013] Offset between fit and detection position for source 60 = 0.107238 pixels
[Sun Jun  9 22:10:11 2013] 295.026000 total counts/ 248.539000 bgd. counts: snr = 2.948725
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.107238 pixels
  Position = (287.3, 339.1) = 6 40 49.96 9 52 26.5
  Extent = 4.7 (3.5-6.1)", rotation angle = 0
  Source counts = 46.5 +/- 17.2
  Background counts = 248.5
  Rate = 0.001 +/- 0.0004
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:11 2013] Source is confused with source 61
[Sun Jun  9 22:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 4.75"
[Sun Jun  9 22:11:03 2013] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.184
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 91 for pass 1, mean size = 4.75"
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src91.ximg exists
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src91_1.ximg exists
[Sun Jun  9 22:11:05 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src91 appears to have run properly
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Sun Jun  9 22:11:07 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src91 appears to have run properly
[Sun Jun  9 22:11:51 2013] Spatial fit model total counts = 348.521000, observed total counts = 381.000000
[Sun Jun  9 22:11:51 2013] Offset between fit and detection position for source 60 = 0.000000 pixels
[Sun Jun  9 22:11:51 2013] 295.026000 total counts/ 248.539000 bgd. counts: snr = 2.948725
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.000000 pixels
  Position = (287.3, 339.1) = 6 40 49.96 9 52 26.5
  Extent = 4.7 (3.5-6.1)", rotation angle = 0
  Source counts = 46.5 +/- 17.2
  Background counts = 248.5
  Rate = 0.001 +/- 0.0004
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:21 2013] XMMSAS src. selection expression = ellipse(24947.602600, 29449.044000, 284.875208, 284.875208, 0.000000, X, Y)
[Mon Jun 10 01:44:21 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src60_src.reg
[Mon Jun 10 01:44:21 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (271, 323) - (304, 355)
[Mon Jun 10 01:44:21 2013] XMMSAS bgd. selection expression = annulus(24947.602600, 29449.044000, 474.792014, 949.584027, X, Y) && !ellipse(24260.767700, 28922.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24350.779800, 29446.727600, 591.066417, 591.066417, 0.000000, X, Y)
[Mon Jun 10 01:44:21 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src60.gif
[Mon Jun 10 02:27:17 2013] Mean detx,y = (2172.47, -2155.71) 
[Mon Jun 10 02:27:19 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:27:30 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:27:31 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Jun 10 02:27:31 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon Jun 10 04:26:42 2013] Not generating rmf since there are only 46 counts
[Mon Jun 10 04:26:42 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:25 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:25 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 79.00
[Mon Jun 10 07:19:25 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src60_bgd.pi.gz = 136.00
[Mon Jun 10 07:19:25 2013] Got source and background scale factors 254400.000000, 1181784.000000
[Mon Jun 10 07:19:25 2013] User source parameters:
  Position = (287.3, 339.1) = 6 40 49.96 9 52 26.5
  Extent = 4.7 (3.5-6.1)", rotation angle = 0
  Source aperture counts = 49.7 +/- 9.9
  Background aperture counts = 29.3
  Rate = 0.001 +/- 0.0002

[Mon Jun 10 07:19:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:32 2013] Using photon index=1.80, rate=0.00116, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src60.arf
[Mon Jun 10 07:19:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:32 2013] Updating source flux to 2.2e-14
[Mon Jun 10 07:20:10 2013] Flag c found in src. 60 procflags, skipping spectral fitting
[Mon Jun 10 07:20:10 2013] Source 60 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete