[Sun Jun  9 22:08:09 2013] Detection parameters:
  Position = (218.4, 347.2) = 6 41 10.26 9 53 3.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.2 +/- 12.4
  Background counts = 17.8
  Rate = 0.003 +/- 0.0005

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 6.80'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 9.83"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.985
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 68 for pass 0, mean size = 9.83"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src68.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src68.csv
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src68_1.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src68.csv
[Sun Jun  9 22:09:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Sun Jun  9 22:09:26 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Sun Jun  9 22:10:11 2013] Source 56 is offset by 1.248215 and 6.084397 pixels which is larger than
2 X fitted extent = 1.139844 x 1.139844, not incorporating fit results
[Sun Jun  9 22:10:11 2013] Warning, spatial fit 68 centroid is now closest to src. 65
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:11 2013] Source is confused with source 57
[Sun Jun  9 22:11:03 2013] Using EEF radius (= 9.83 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 9.83"
[Sun Jun  9 22:11:03 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.985
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 67 for pass 1, mean size = 9.83"
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src67.ximg exists
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src67_1.ximg exists
[Sun Jun  9 22:11:05 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src67 appears to have run properly
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Sun Jun  9 22:11:06 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Sun Jun  9 22:11:51 2013] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 10.365211 pixels away
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:20 2013] XMMSAS src. selection expression = ellipse(18949.426727, 30158.174530, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 01:44:20 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src56_src.reg
[Mon Jun 10 01:44:20 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (181, 310) - (256, 385)
[Mon Jun 10 01:44:20 2013] XMMSAS bgd. selection expression = annulus(18949.426727, 30158.174530, 1087.500000, 2175.000000, X, Y) && !ellipse(20720.045800, 28706.781200, 355.949610, 355.949610, 0.000000, X, Y) && !ellipse(21450.502345, 29878.297957, 417.536329, 303.305224, 94.252977, X, Y) && !ellipse(21360.282000, 28746.102000, 251.110407, 251.110407, 0.000000, X, Y) && !ellipse(18286.996400, 29655.342000, 699.696020, 348.162410, 78.039600, X, Y) && !ellipse(18099.943200, 32669.451800, 458.228013, 458.228013, 0.000000, X, Y) && !ellipse(20674.292000, 30479.424000, 355.368810, 355.368810, 0.000000, X, Y) && !ellipse(21895.873367, 31075.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21183.576797, 31098.546082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18060.038260, 28800.008400, 368.610411, 339.484010, 108.504445, X, Y) && !ellipse(19356.284760, 30123.975000, 400.858412, 400.858412, 0.000000, X, Y) && !ellipse(19295.423600, 28644.160500, 603.706417, 603.706417, 0.000000, X, Y) && !ellipse(16912.769684, 32006.741333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17113.532379, 29850.339813, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 01:44:20 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src56.gif
[Mon Jun 10 02:17:35 2013] Mean detx,y = (3151.74, -8081.89) 
[Mon Jun 10 02:17:37 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:18:17 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:18:17 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Mon Jun 10 02:18:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Mon Jun 10 04:16:41 2013] Not generating rmf since there are only 72 counts
[Mon Jun 10 04:16:41 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:22 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:22 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 254.00
[Mon Jun 10 07:19:22 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src56_bgd.pi.gz = 652.00
[Mon Jun 10 07:19:22 2013] Got source and background scale factors 1349580.000000, 5446398.000000
[Mon Jun 10 07:19:22 2013] User source parameters:
  Position = (218.4, 347.2) = 6 41 10.26 9 53 3.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 92.4 +/- 17.0
  Background aperture counts = 161.6
  Rate = 0.002 +/- 0.0004

[Mon Jun 10 07:19:22 2013] Updating counts from extracted products
[Mon Jun 10 07:19:22 2013] Set source signif. to 92.44/12.71 = 7.27
[Mon Jun 10 07:19:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:32 2013] Using photon index=1.80, rate=0.0023, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src56.arf
[Mon Jun 10 07:19:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:32 2013] Updating source flux to 5.3e-14
[Mon Jun 10 07:20:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete