[Sun Jun  9 22:08:09 2013] Detection parameters:
  Position = (237.7, 351.1) = 6 41 4.58 9 53 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.0 +/- 18.1
  Background counts = 20.1
  Rate = 0.008 +/- 0.0007

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 5.83'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 9.34"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.1, npix_max = 28, mask sum = 18, frac = 0.642
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 9.34"
[Sun Jun  9 22:09:23 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src20.ximg exists
[Sun Jun  9 22:09:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src20.csv
[Sun Jun  9 22:09:23 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun Jun  9 22:09:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src20.csv
[Sun Jun  9 22:09:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun Jun  9 22:09:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Jun  9 22:09:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun Jun  9 22:09:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 423.410000, observed total counts = 495.000000
[Sun Jun  9 22:10:11 2013] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 683.084000, observed total counts = 677.000000
[Sun Jun  9 22:10:11 2013] Offset between fit and detection position for source 55 = 0.564509 pixels
[Sun Jun  9 22:10:11 2013] Warning, changing simple spatial fit ID from 20 to 39
[Sun Jun  9 22:10:11 2013] 626.754500 total counts/ 564.678000 bgd. counts: snr = 2.612322
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.564509 pixels
  Position = (238.2, 350.9) = 6 41 4.42 9 53 18.1
  Extent = 4.5 (3.4-7.0)", rotation angle = 0
  Source counts = 62.1 +/- 25.0
  Background counts = 564.7
  Rate = 0.002 +/- 0.0006
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 4.53"
[Sun Jun  9 22:11:03 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.947
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 4.53"
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src19.csv
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src19.csv
[Sun Jun  9 22:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun  9 22:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:50 2013] Spatial fit model total counts = 395.410000, observed total counts = 495.000000
[Sun Jun  9 22:11:50 2013] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:11:50 2013] Spatial fit model total counts = 681.237000, observed total counts = 677.000000
[Sun Jun  9 22:11:50 2013] Offset between fit and detection position for source 55 = 0.021374 pixels
[Sun Jun  9 22:11:50 2013] Warning, changing simple spatial fit ID from 19 to 38
[Sun Jun  9 22:11:50 2013] 611.912600 total counts/ 551.100000 bgd. counts: snr = 2.590469
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.021374 pixels
  Position = (238.2, 350.9) = 6 41 4.42 9 53 18.0
  Extent = 4.4 (3.3-6.8)", rotation angle = 0
  Source counts = 60.8 +/- 24.7
  Background counts = 551.1
  Rate = 0.002 +/- 0.0006
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:18 2013] XMMSAS src. selection expression = ellipse(20674.292000, 30479.424000, 266.526608, 266.526608, 0.000000, X, Y)
[Mon Jun 10 01:44:18 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src55_src.reg
[Mon Jun 10 01:44:18 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (223, 336) - (254, 366)
[Mon Jun 10 01:44:18 2013] XMMSAS bgd. selection expression = annulus(20674.292000, 30479.424000, 444.211013, 888.422026, X, Y) && !ellipse(21450.502345, 29878.297957, 417.536329, 303.305224, 94.252977, X, Y) && !ellipse(22255.856842, 30335.724304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21895.873367, 31075.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21183.576797, 31098.546082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18949.426727, 30158.174530, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 01:44:18 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src55.gif
[Mon Jun 10 01:56:42 2013] Mean detx,y = (3411.73, -6401.25) 
[Mon Jun 10 01:56:44 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 01:57:02 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 01:57:03 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Mon Jun 10 01:57:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Mon Jun 10 03:40:07 2013] Not generating rmf since there are only 60 counts
[Mon Jun 10 03:40:07 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:14 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:14 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 192.00
[Mon Jun 10 07:19:14 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src55_bgd.pi.gz = 82.00
[Mon Jun 10 07:19:14 2013] Got source and background scale factors 210692.000000, 535445.000000
[Mon Jun 10 07:19:14 2013] User source parameters:
  Position = (238.2, 350.9) = 6 41 4.42 9 53 18.0
  Extent = 4.4 (3.3-6.8)", rotation angle = 0
  Source aperture counts = 159.7 +/- 14.9
  Background aperture counts = 32.3
  Rate = 0.004 +/- 0.0004

[Mon Jun 10 07:19:30 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:30 2013] Using photon index=1.80, rate=0.00151, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src55.arf
[Mon Jun 10 07:19:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:30 2013] Updating source flux to 4.7e-14
[Mon Jun 10 07:20:10 2013] Flag p found in src. 55 procflags, skipping spectral fitting
[Mon Jun 10 07:20:10 2013] Source 55 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete