[Sun Jun  9 22:08:09 2013] Detection parameters:
  Position = (313.2, 357.2) = 6 40 42.33 9 53 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.4 +/- 11.7
  Background counts = 18.9
  Rate = 0.002 +/- 0.0003

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 4.39'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 8.63"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.811
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 80 for pass 0, mean size = 8.63"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src80.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src80.csv
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src80_1.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src80.csv
[Sun Jun  9 22:09:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Sun Jun  9 22:09:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src80.csv
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Sun Jun  9 22:09:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src80.csv
[Sun Jun  9 22:09:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:11 2013] Warning, spatial fit 80 centroid is now closest to src. 48
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 8.63"
[Sun Jun  9 22:11:03 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.811
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 79 for pass 1, mean size = 8.63"
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src79.ximg exists
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src79_1.ximg exists
[Sun Jun  9 22:11:05 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src79 appears to have run properly
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Sun Jun  9 22:11:06 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Sun Jun  9 22:11:51 2013] Spatial fit model total counts = 279.089000, observed total counts = 305.000000
[Sun Jun  9 22:11:51 2013] Offset between fit and detection position for source 52 = 0.596368 pixels
[Sun Jun  9 22:11:51 2013] 284.265600 total counts/ 237.052000 bgd. counts: snr = 3.066516
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.596368 pixels
  Position = (313.1, 357.8) = 6 40 42.37 9 53 48.0
  Extent = 3.4 (2.6-4.5)", rotation angle = 0
  Source counts = 47.2 +/- 16.9
  Background counts = 237.1
  Rate = 0.001 +/- 0.0004
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:21 2013] XMMSAS src. selection expression = ellipse(27193.305940, 31079.746820, 202.756806, 202.756806, 0.000000, X, Y)
[Mon Jun 10 01:44:21 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src52_src.reg
[Mon Jun 10 01:44:21 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (301, 346) - (325, 369)
[Mon Jun 10 01:44:21 2013] XMMSAS bgd. selection expression = annulus(27193.305940, 31079.746820, 337.928010, 675.856019, X, Y) && !ellipse(27611.314200, 30034.632200, 410.336012, 410.336012, 0.000000, X, Y)
[Mon Jun 10 01:44:21 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src52.gif
[Mon Jun 10 02:22:43 2013] Mean detx,y = (3666.24, 166.15) 
[Mon Jun 10 02:22:45 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:22:58 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:22:58 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Mon Jun 10 02:22:58 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Mon Jun 10 04:21:49 2013] Not generating rmf since there are only 47 counts
[Mon Jun 10 04:21:49 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:23 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:23 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 59.00
[Mon Jun 10 07:19:24 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src52_bgd.pi.gz = 159.00
[Mon Jun 10 07:19:24 2013] Got source and background scale factors 122004.000000, 934168.000000
[Mon Jun 10 07:19:24 2013] User source parameters:
  Position = (313.1, 357.8) = 6 40 42.37 9 53 48.0
  Extent = 3.4 (2.6-4.5)", rotation angle = 0
  Source aperture counts = 38.2 +/- 8.7
  Background aperture counts = 20.8
  Rate = 0.001 +/- 0.0002

[Mon Jun 10 07:19:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:32 2013] Using photon index=1.80, rate=0.00117, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src52.arf
[Mon Jun 10 07:19:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:32 2013] Updating source flux to 2.6e-14
[Mon Jun 10 07:20:10 2013] Source 52 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete