[Sun Jun  9 22:08:09 2013] Detection parameters:
  Position = (299.4, 366.2) = 6 40 46.40 9 54 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.5 +/- 10.5
  Background counts = 18.8
  Rate = 0.002 +/- 0.0003

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 4.92'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 8.89"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.812
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 100 for pass 0, mean size = 8.89"
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src100.ximg exists
[Sun Jun  9 22:09:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src100.csv
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src100_1.ximg exists
[Sun Jun  9 22:09:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src100.csv
[Sun Jun  9 22:09:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:27 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Sun Jun  9 22:09:27 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Sun Jun  9 22:09:27 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src100 appears to have run properly
[Sun Jun  9 22:10:11 2013] Source 48 is offset by -6.005510 and 1.521947 pixels which is larger than
2 X fitted extent = 0.991462 x 0.991462, not incorporating fit results
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 230.437000, observed total counts = 221.000000
[Sun Jun  9 22:10:11 2013] Offset between fit and detection position for source 48 = 0.072150 pixels
[Sun Jun  9 22:10:11 2013] 225.131700 total counts/ 181.278000 bgd. counts: snr = 3.257119
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.072150 pixels
  Position = (299.3, 366.2) = 6 40 46.42 9 54 24.6
  Extent = 5.5 (3.8-7.8)", rotation angle = 0
  Source counts = 43.9 +/- 15.0
  Background counts = 181.3
  Rate = 0.001 +/- 0.0004
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 5.49"
[Sun Jun  9 22:11:03 2013] source mask rpix=1.3, npix_max = 12, mask sum = 10, frac = 0.804
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 96 for pass 1, mean size = 5.49"
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src96.ximg exists
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src96_1.ximg exists
[Sun Jun  9 22:11:05 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src96 appears to have run properly
[Sun Jun  9 22:11:07 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src96.ximg exists
[Sun Jun  9 22:11:07 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src96_1.ximg exists
[Sun Jun  9 22:11:07 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src96 appears to have run properly
[Sun Jun  9 22:11:51 2013] Spatial fit model total counts = 227.723000, observed total counts = 221.000000
[Sun Jun  9 22:11:51 2013] Offset between fit and detection position for source 48 = 0.044634 pixels
[Sun Jun  9 22:11:51 2013] 222.473500 total counts/ 176.309000 bgd. counts: snr = 3.476729
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.044634 pixels
  Position = (299.3, 366.2) = 6 40 46.43 9 54 24.5
  Extent = 5.9 (3.6-8.6)", rotation angle = 0
  Source counts = 46.2 +/- 14.9
  Background counts = 176.3
  Rate = 0.001 +/- 0.0004
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:21 2013] XMMSAS src. selection expression = ellipse(25991.120600, 31810.333000, 353.841610, 353.841610, 0.000000, X, Y)
[Mon Jun 10 01:44:21 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src48_src.reg
[Mon Jun 10 01:44:21 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (279, 346) - (320, 387)
[Mon Jun 10 01:44:21 2013] XMMSAS bgd. selection expression = annulus(25991.120600, 31810.333000, 589.736017, 1179.472034, X, Y) && !ellipse(24821.931460, 32466.161800, 413.511212, 413.511212, 0.000000, X, Y) && !ellipse(25551.726200, 30899.170400, 327.323209, 327.323209, 0.000000, X, Y) && !ellipse(24751.788818, 33548.418610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27193.305940, 31079.746820, 270.342408, 270.342408, 0.000000, X, Y)
[Mon Jun 10 01:44:21 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src48.gif
[Mon Jun 10 02:29:08 2013] Mean detx,y = (4497.08, -1018.41) 
[Mon Jun 10 02:29:09 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:29:18 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:29:18 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Mon Jun 10 02:29:18 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Mon Jun 10 04:27:09 2013] Not generating rmf since there are only 46 counts
[Mon Jun 10 04:27:09 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:26 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:26 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 75.00
[Mon Jun 10 07:19:26 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src48_bgd.pi.gz = 235.00
[Mon Jun 10 07:19:26 2013] Got source and background scale factors 343304.000000, 2636656.000000
[Mon Jun 10 07:19:26 2013] User source parameters:
  Position = (299.3, 366.2) = 6 40 46.43 9 54 24.5
  Extent = 5.9 (3.6-8.6)", rotation angle = 0
  Source aperture counts = 44.4 +/- 9.7
  Background aperture counts = 30.6
  Rate = 0.001 +/- 0.0002

[Mon Jun 10 07:19:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:32 2013] Using photon index=1.80, rate=0.00115, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src48.arf
[Mon Jun 10 07:19:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:32 2013] Updating source flux to 2.2e-14
[Mon Jun 10 07:20:10 2013] Flag b found in src. 48 procflags, skipping spectral fitting
[Mon Jun 10 07:20:10 2013] Source 48 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete