[Sun Jun  9 22:08:08 2013] Detection parameters:
  Position = (285.1, 386.2) = 6 40 50.63 9 55 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.8 +/- 12.2
  Background counts = 19.8
  Rate = 0.003 +/- 0.0004

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 6.43'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 9.65"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.2, npix_max = 29, mask sum = 34, frac = 1.151
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 69 for pass 0, mean size = 9.65"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src69.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src69.csv
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src69_1.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src69.csv
[Sun Jun  9 22:09:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Sun Jun  9 22:09:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src69.csv
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Sun Jun  9 22:09:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src69.csv
[Sun Jun  9 22:09:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:11 2013] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 13.183542 pixels away
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using EEF radius (= 9.65 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 9.65"
[Sun Jun  9 22:11:03 2013] source mask rpix=2.2, npix_max = 29, mask sum = 34, frac = 1.151
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 9.65"
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src68.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src68.csv
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src68_1.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src68.csv
[Sun Jun  9 22:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Sun Jun  9 22:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src68.csv
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Sun Jun  9 22:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src68.csv
[Sun Jun  9 22:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:51 2013] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 13.101489 pixels away
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:20 2013] XMMSAS src. selection expression = ellipse(24751.788818, 33548.418610, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 01:44:20 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src41_src.reg
[Mon Jun 10 01:44:20 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (248, 349) - (323, 424)
[Mon Jun 10 01:44:20 2013] XMMSAS bgd. selection expression = annulus(24751.788818, 33548.418610, 1087.500000, 2175.000000, X, Y) && !ellipse(23071.625214, 31523.730438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22397.192150, 31003.804800, 639.018418, 639.018418, 0.000000, X, Y) && !ellipse(22218.583660, 32925.157200, 382.400011, 382.400011, 0.000000, X, Y) && !ellipse(26516.801849, 35794.456573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22739.560699, 34302.409760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21895.873367, 31075.949127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24821.931460, 32466.161800, 413.511212, 413.511212, 0.000000, X, Y) && !ellipse(24978.366200, 34938.651800, 473.226414, 473.226414, 0.000000, X, Y) && !ellipse(22601.594757, 33375.687714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25991.120600, 31810.333000, 471.788814, 471.788814, 0.000000, X, Y) && !ellipse(25225.063721, 35666.372650, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 01:44:20 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src41.gif
[Mon Jun 10 02:18:23 2013] Mean detx,y = (6225.55, -2165.42) 
[Mon Jun 10 02:18:25 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:19:06 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:19:06 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Mon Jun 10 02:19:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Mon Jun 10 04:16:47 2013] Not generating rmf since there are only 85 counts
[Mon Jun 10 04:16:47 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:22 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:22 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src41_src_b10.pi.gz = 156.00
[Mon Jun 10 07:19:22 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src41_bgd.pi.gz = 584.00
[Mon Jun 10 07:19:22 2013] Got source and background scale factors 1172774.000000, 6421373.000000
[Mon Jun 10 07:19:22 2013] User source parameters:
  Position = (285.1, 386.2) = 6 40 50.63 9 55 53.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 49.3 +/- 13.5
  Background aperture counts = 106.7
  Rate = 0.001 +/- 0.0003

[Mon Jun 10 07:19:22 2013] Updating counts from extracted products
[Mon Jun 10 07:19:22 2013] Set source signif. to 49.34/10.33 = 4.78
[Mon Jun 10 07:19:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:32 2013] Using photon index=1.80, rate=0.00123, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src41.arf
[Mon Jun 10 07:19:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:32 2013] Updating source flux to 2.6e-14
[Mon Jun 10 07:20:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete