[Sun Jun  9 22:08:07 2013] Detection parameters:
  Position = (258.4, 359.9) = 6 40 58.46 9 53 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4976.4 +/- 113.4
  Background counts = 19.0
  Rate = 0.2 +/- 0.005

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 5.31'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.1, npix_max = 26, mask sum = 17, frac = 0.634
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.09"
[Sun Jun  9 22:09:23 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  9 22:09:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src1.csv
[Sun Jun  9 22:09:23 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  9 22:09:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src1.csv
[Sun Jun  9 22:09:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  9 22:09:25 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 7540.110000, observed total counts = 8073.000000
[Sun Jun  9 22:10:11 2013] Offset between fit and detection position for source 3 = 2.482798 pixels
[Sun Jun  9 22:10:11 2013] 7560.840000 total counts/ 4135.310000 bgd. counts: snr = 53.268901
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.482798 pixels
  Position = (257.6, 357.5) = 6 40 58.70 9 53 46.8
  Extent = 9.1 (8.9-9.4)", rotation angle = 0
  Source counts = 3425.5 +/- 87.0
  Background counts = 4135.3
  Rate = 0.09 +/- 0.002
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 6499.530000, observed total counts = 6430.000000
[Sun Jun  9 22:10:11 2013] Offset between fit and detection position for source 3 = 0.894405 pixels
[Sun Jun  9 22:10:11 2013] Warning, changing simple spatial fit ID from 1 to 3
[Sun Jun  9 22:10:11 2013] 5695.124336 total counts/ 5694.920000 bgd. counts: snr = 0.002708
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.894405 pixels
  Position = (256.9, 357.0) = 6 40 58.91 9 53 44.4
  Extent = 4.4" x 3.2", rotation angle = 360
  Source counts = 0.2 +/- 75.5
  Background counts = 5694.9
  Rate = 5e-06 +/- 0.002
  Deleting source due to low Poisson probability