[Sun Jun  9 22:08:08 2013] Detection parameters:
  Position = (327.1, 267.8) = 6 40 38.25 9 47 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 402.3 +/- 26.1
  Background counts = 17.6
  Rate = 0.01 +/- 0.0007

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 3.04'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 7.95"
[Sun Jun  9 22:09:22 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.923
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 7.95"
[Sun Jun  9 22:09:23 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src16.ximg exists
[Sun Jun  9 22:09:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src16.csv
[Sun Jun  9 22:09:23 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Jun  9 22:09:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src16.csv
[Sun Jun  9 22:09:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Jun  9 22:09:25 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 1001.000000, observed total counts = 1001.000000
[Sun Jun  9 22:10:11 2013] Offset between fit and detection position for source 21 = 0.340084 pixels
[Sun Jun  9 22:10:11 2013] 641.549000 total counts/ 407.799000 bgd. counts: snr = 11.575201
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.340084 pixels
  Position = (327.0, 267.5) = 6 40 38.29 9 47 15.3
  Extent = 4.4 (3.6-5.0)", rotation angle = 0
  Source counts = 233.8 +/- 25.3
  Background counts = 407.8
  Rate = 0.006 +/- 0.0006
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:11 2013] Source is confused with source 10
[Sun Jun  9 22:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 4.36"
[Sun Jun  9 22:11:03 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.997
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 4.36"
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src15.csv
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src15.csv
[Sun Jun  9 22:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jun  9 22:11:05 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Jun  9 22:11:50 2013] Warning, spatial fit 15 centroid is now closest to src. 10
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:18 2013] XMMSAS src. selection expression = ellipse(28397.987560, 23225.195000, 261.513008, 261.513008, 0.000000, X, Y)
[Mon Jun 10 01:44:18 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src21_src.reg
[Mon Jun 10 01:44:18 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (312, 252) - (342, 283)
[Mon Jun 10 01:44:18 2013] XMMSAS bgd. selection expression = annulus(28397.987560, 23225.195000, 435.855013, 871.710025, X, Y) && !ellipse(26963.051208, 21806.856873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28653.134000, 23339.354400, 697.368020, 697.368020, 0.000000, X, Y) && !ellipse(27506.846400, 24293.534800, 373.421611, 373.421611, 0.000000, X, Y)
[Mon Jun 10 01:44:18 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src21.gif
[Mon Jun 10 01:55:35 2013] Mean detx,y = (-4217.46, 985.34) 
[Mon Jun 10 01:55:37 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 01:55:45 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 01:55:45 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jun 10 01:55:45 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Jun 10 07:19:14 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:14 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 305.00
[Mon Jun 10 07:19:14 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 91.00
[Mon Jun 10 07:19:14 2013] Got source and background scale factors 219200.000000, 947200.000000
[Mon Jun 10 07:19:14 2013] User source parameters:
  Position = (327.0, 267.5) = 6 40 38.29 9 47 15.3
  Extent = 4.4 (3.6-5.0)", rotation angle = 0
  Source aperture counts = 283.9 +/- 18.5
  Background aperture counts = 21.1
  Rate = 0.007 +/- 0.0005

[Mon Jun 10 07:19:30 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:30 2013] Using photon index=1.80, rate=0.00581, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src21.arf
[Mon Jun 10 07:19:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:30 2013] Updating source flux to 1.2e-13
[Mon Jun 10 07:20:10 2013] Flag c found in src. 21 procflags, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete