[Sun Jun  9 22:08:11 2013] Detection parameters:
  Position = (226.9, 223.1) = 6 41 7.73 9 44 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.7 +/- 11.7
  Background counts = 13.0
  Rate = 0.002 +/- 0.0003

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 7.53'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 10.19"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.113
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 93 for pass 0, mean size = 10.19"
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src93.ximg exists
[Sun Jun  9 22:09:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src93.csv
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src93_1.ximg exists
[Sun Jun  9 22:09:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src93.csv
[Sun Jun  9 22:09:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Sun Jun  9 22:09:26 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 172.997000, observed total counts = 173.000000
[Sun Jun  9 22:10:11 2013] Offset between fit and detection position for source 107 = 0.226454 pixels
[Sun Jun  9 22:10:11 2013] 177.370600 total counts/ 128.807000 bgd. counts: snr = 4.278989
Spatial fit parameters:
  Offset between fit and detection position for source 107 = 0.226454 pixels
  Position = (227.1, 223.0) = 6 41 7.67 9 44 1.7
  Extent = 5.0 (3.1-6.4)", rotation angle = 0
  Source counts = 48.6 +/- 13.3
  Background counts = 128.8
  Rate = 0.001 +/- 0.0003
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 5.04"
[Sun Jun  9 22:11:03 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.454
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 92 for pass 1, mean size = 5.04"
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src92.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src92.csv
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src92_1.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src92.csv
[Sun Jun  9 22:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:07 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src92.ximg exists
[Sun Jun  9 22:11:07 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src92_1.ximg exists
[Sun Jun  9 22:11:07 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src92 appears to have run properly
[Sun Jun  9 22:11:51 2013] Spatial fit model total counts = 171.991000, observed total counts = 172.000000
[Sun Jun  9 22:11:51 2013] Offset between fit and detection position for source 107 = 0.078708 pixels
[Sun Jun  9 22:11:51 2013] 175.113800 total counts/ 123.576000 bgd. counts: snr = 4.636164
Spatial fit parameters:
  Offset between fit and detection position for source 107 = 0.078708 pixels
  Position = (227.2, 223.0) = 6 41 7.65 9 44 1.5
  Extent = 5.3 (3.6-6.6)", rotation angle = 0
  Source counts = 51.5 +/- 13.2
  Background counts = 123.6
  Rate = 0.001 +/- 0.0003
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:21 2013] XMMSAS src. selection expression = ellipse(19717.997020, 19351.023600, 317.652609, 317.652609, 0.000000, X, Y)
[Mon Jun 10 01:44:21 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src107_src.reg
[Mon Jun 10 01:44:21 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (209, 205) - (245, 241)
[Mon Jun 10 01:44:21 2013] XMMSAS bgd. selection expression = annulus(19717.997020, 19351.023600, 529.421015, 1058.842030, X, Y) && !ellipse(19502.551636, 17874.443863, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 01:44:21 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src107.gif
[Mon Jun 10 02:27:37 2013] Mean detx,y = (-7652.90, -7888.58) 
[Mon Jun 10 02:27:40 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:27:51 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:27:51 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src107_src_b10.pi.gz
[Mon Jun 10 02:27:51 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src107_bgd.pi.gz
[Mon Jun 10 04:26:47 2013] Not generating rmf since there are only 51 counts
[Mon Jun 10 04:26:47 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:25 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:25 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src107_src_b10.pi.gz = 69.00
[Mon Jun 10 07:19:25 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src107_bgd.pi.gz = 117.00
[Mon Jun 10 07:19:25 2013] Got source and background scale factors 324800.000000, 2265112.000000
[Mon Jun 10 07:19:25 2013] User source parameters:
  Position = (227.2, 223.0) = 6 41 7.65 9 44 1.5
  Extent = 5.3 (3.6-6.6)", rotation angle = 0
  Source aperture counts = 52.2 +/- 9.4
  Background aperture counts = 16.8
  Rate = 0.001 +/- 0.0002

[Mon Jun 10 07:19:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:32 2013] Using photon index=1.80, rate=0.00128, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src107.arf
[Mon Jun 10 07:19:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:32 2013] Updating source flux to 4.3e-14
[Mon Jun 10 07:20:10 2013] Source 107 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src107_pl.csv not found, spectral fit skipped or did not complete