[Sun Jun  9 22:08:11 2013] Detection parameters:
  Position = (388.3, 225.9) = 6 40 20.26 9 44 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.0 +/- 10.4
  Background counts = 18.6
  Rate = 0.002 +/- 0.0005

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 8.37'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 10.61"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.041
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 10.61"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src81.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src81.csv
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src81_1.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src81.csv
[Sun Jun  9 22:09:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Sun Jun  9 22:09:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src81.csv
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Sun Jun  9 22:09:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src81.csv
[Sun Jun  9 22:09:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:10:11 2013] Warning, spatial fit 81 centroid is now closest to src. 100
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 10.61"
[Sun Jun  9 22:11:03 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.041
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 80 for pass 1, mean size = 10.61"
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src80.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src80.csv
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src80_1.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src80.csv
[Sun Jun  9 22:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Sun Jun  9 22:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Sun Jun  9 22:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src80.csv
[Sun Jun  9 22:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:51 2013] Spatial fit model total counts = 369.969000, observed total counts = 290.000000
[Sun Jun  9 22:11:51 2013] Poor agreement between spatial fit and data for source 105
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:21 2013] XMMSAS src. selection expression = ellipse(33729.765076, 19601.782028, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 01:44:21 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src105_src.reg
[Mon Jun 10 01:44:21 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (351, 188) - (426, 263)
[Mon Jun 10 01:44:21 2013] XMMSAS bgd. selection expression = annulus(33729.765076, 19601.782028, 1087.500000, 2175.000000, X, Y) && !ellipse(33778.728200, 20717.915000, 354.371210, 354.371210, 0.000000, X, Y) && !ellipse(31191.418040, 17281.874400, 581.068817, 581.068817, 0.000000, X, Y)
[Mon Jun 10 01:44:21 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src105.gif
[Mon Jun 10 02:23:05 2013] Mean detx,y = (-8110.85, 6054.90) 
[Mon Jun 10 02:23:08 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:23:45 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:23:46 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Mon Jun 10 02:23:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src105_bgd.pi.gz
[Mon Jun 10 04:21:54 2013] Not generating rmf since there are only 50 counts
[Mon Jun 10 04:21:54 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:24 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:24 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src105_src_b10.pi.gz = 210.00
[Mon Jun 10 07:19:24 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src105_bgd.pi.gz = 906.00
[Mon Jun 10 07:19:24 2013] Got source and background scale factors 1132618.000000, 10030698.000000
[Mon Jun 10 07:19:24 2013] User source parameters:
  Position = (388.3, 225.9) = 6 40 20.26 9 44 12.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 107.7 +/- 15.5
  Background aperture counts = 102.3
  Rate = 0.003 +/- 0.0004

[Mon Jun 10 07:19:24 2013] Updating counts from extracted products
[Mon Jun 10 07:19:24 2013] Set source signif. to 107.70/10.11 = 10.65
[Mon Jun 10 07:19:32 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:32 2013] Using photon index=1.80, rate=0.00268, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src105.arf
[Mon Jun 10 07:19:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:32 2013] Updating source flux to 6.8e-14
[Mon Jun 10 07:20:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src105_pl.csv not found, spectral fit skipped or did not complete