[Sun Jun  9 22:08:11 2013] Detection parameters:
  Position = (278.7, 227.1) = 6 40 52.49 9 44 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.1 +/- 13.0
  Background counts = 11.5
  Rate = 0.005 +/- 0.0006

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 5.36'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 9.11"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.854
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 9.11"
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src42.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src42.csv
[Sun Jun  9 22:09:24 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun Jun  9 22:09:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src42.csv
[Sun Jun  9 22:09:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun Jun  9 22:09:26 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun Jun  9 22:09:26 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Sun Jun  9 22:10:11 2013] Warning, spatial fit 42 centroid is now closest to src. 102
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 473.613000, observed total counts = 433.000000
[Sun Jun  9 22:10:11 2013] Offset between fit and detection position for source 104 = 0.418044 pixels
[Sun Jun  9 22:10:11 2013] Warning, changing simple spatial fit ID from 42 to 58
[Sun Jun  9 22:10:11 2013] 326.410800 total counts/ 275.543000 bgd. counts: snr = 3.064420
Spatial fit parameters:
  Offset between fit and detection position for source 104 = 0.418044 pixels
  Position = (278.4, 227.4) = 6 40 52.59 9 44 20.8
  Extent = 3.8 (2.8-5.0)", rotation angle = 0
  Source counts = 50.9 +/- 18.1
  Background counts = 275.5
  Rate = 0.001 +/- 0.0004
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 3.83"
[Sun Jun  9 22:11:03 2013] source mask rpix=0.9, npix_max = 7, mask sum = 8, frac = 1.051
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 3.83"
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src41.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src41.csv
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src41.csv
[Sun Jun  9 22:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sun Jun  9 22:11:06 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sun Jun  9 22:11:06 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Sun Jun  9 22:11:50 2013] Warning, spatial fit 41 centroid is now closest to src. 102
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:19 2013] XMMSAS src. selection expression = ellipse(24172.392000, 19736.078000, 229.560607, 229.560607, 0.000000, X, Y)
[Mon Jun 10 01:44:19 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src104_src.reg
[Mon Jun 10 01:44:19 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (265, 214) - (292, 241)
[Mon Jun 10 01:44:19 2013] XMMSAS bgd. selection expression = annulus(24172.392000, 19736.078000, 382.601011, 765.202022, X, Y) && !ellipse(24114.126400, 20360.703400, 300.571209, 300.571209, 0.000000, X, Y) && !ellipse(24645.446930, 20216.947006, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 01:44:19 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src104.gif
[Mon Jun 10 02:07:33 2013] Mean detx,y = (-7479.46, -3428.96) 
[Mon Jun 10 02:07:35 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 02:07:48 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 02:07:48 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Mon Jun 10 02:07:48 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Mon Jun 10 04:02:43 2013] Not generating rmf since there are only 50 counts
[Mon Jun 10 04:02:43 2013] rmf not generated due to insufficient counts
[Mon Jun 10 07:19:18 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:18 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src104_src_b10.pi.gz = 76.00
[Mon Jun 10 07:19:18 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src104_bgd.pi.gz = 56.00
[Mon Jun 10 07:19:18 2013] Got source and background scale factors 143168.000000, 648824.000000
[Mon Jun 10 07:19:18 2013] User source parameters:
  Position = (278.4, 227.4) = 6 40 52.59 9 44 20.8
  Extent = 3.8 (2.8-5.0)", rotation angle = 0
  Source aperture counts = 63.6 +/- 9.8
  Background aperture counts = 12.4
  Rate = 0.002 +/- 0.0002

[Mon Jun 10 07:19:31 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:31 2013] Using photon index=1.80, rate=0.00127, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src104.arf
[Mon Jun 10 07:19:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:31 2013] Updating source flux to 4.1e-14
[Mon Jun 10 07:20:10 2013] Source 104 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src104_pl.csv not found, spectral fit skipped or did not complete