[Sun Jun  9 22:08:11 2013] Detection parameters:
  Position = (277.9, 234.5) = 6 40 52.73 9 44 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.4 +/- 16.5
  Background counts = 13.9
  Rate = 0.008 +/- 0.0007

[Sun Jun  9 22:08:11 2013] Off-axis axis estimate = 4.87'
[Sun Jun  9 22:09:22 2013] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:09:22 2013] Initial guess for spatial extent in simple fitting = 8.86"
[Sun Jun  9 22:09:22 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.971
[Sun Jun  9 22:09:22 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.86"
[Sun Jun  9 22:09:23 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jun  9 22:09:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src19.csv
[Sun Jun  9 22:09:23 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jun  9 22:09:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src19.csv
[Sun Jun  9 22:09:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jun  9 22:09:25 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jun  9 22:09:25 2013] Fit fullrun_mos1_xmm0011420101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Jun  9 22:10:11 2013] Spatial fit model total counts = 441.199000, observed total counts = 410.000000
[Sun Jun  9 22:10:11 2013] Offset between fit and detection position for source 103 = 0.191100 pixels
[Sun Jun  9 22:10:11 2013] 425.485000 total counts/ 321.977000 bgd. counts: snr = 5.768481
Spatial fit parameters:
  Offset between fit and detection position for source 103 = 0.191100 pixels
  Position = (277.7, 234.6) = 6 40 52.78 9 44 52.1
  Extent = 3.8 (3.0-4.5)", rotation angle = 0
  Source counts = 103.5 +/- 20.6
  Background counts = 322.0
  Rate = 0.003 +/- 0.0005
[Sun Jun  9 22:10:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:10:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:10:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:10:11 2013] Source does appear to be extended
[Sun Jun  9 22:10:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 22:10:11 2013] Source is confused with source 102
[Sun Jun  9 22:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 22:11:03 2013] Initial guess for spatial extent in simple fitting = 3.76"
[Sun Jun  9 22:11:03 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.210
[Sun Jun  9 22:11:03 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 3.76"
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src18.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src18.csv
[Sun Jun  9 22:11:04 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Jun  9 22:11:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src18.csv
[Sun Jun  9 22:11:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Jun  9 22:11:05 2013] fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Jun  9 22:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Jun  9 22:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0011420101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 22:11:50 2013] Warning, spatial fit 18 centroid is now closest to src. 102
[Sun Jun  9 22:11:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 22:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 22:11:51 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 22:11:51 2013] Source does appear to be extended
[Sun Jun  9 22:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 01:44:18 2013] XMMSAS src. selection expression = ellipse(24114.126400, 20360.703400, 225.428406, 225.428406, 0.000000, X, Y)
[Mon Jun 10 01:44:18 2013] Writing source region out to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src103_src.reg
[Mon Jun 10 01:44:18 2013] Extracting stamp from image fullrun_mos1_xmm0011420101_pi300-10000_cl_sm2.00.img.gz, (265, 222) - (291, 248)
[Mon Jun 10 01:44:18 2013] XMMSAS bgd. selection expression = annulus(24114.126400, 20360.703400, 375.714011, 751.428022, X, Y) && !ellipse(24172.392000, 19736.078000, 306.080809, 306.080809, 0.000000, X, Y) && !ellipse(24645.446930, 20216.947006, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 01:44:18 2013] Writing fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src103.gif
[Mon Jun 10 01:56:22 2013] Mean detx,y = (-6869.80, -3457.13) 
[Mon Jun 10 01:56:24 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 01:56:36 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 01:56:36 2013] Setting source spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Mon Jun 10 01:56:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src103_bgd.pi.gz
[Mon Jun 10 07:19:14 2013] Updating aperture counts using extracted products
[Mon Jun 10 07:19:14 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src103_src_b10.pi.gz = 132.00
[Mon Jun 10 07:19:14 2013] Total counts from fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src103_bgd.pi.gz = 50.00
[Mon Jun 10 07:19:14 2013] Got source and background scale factors 143692.000000, 514588.000000
[Mon Jun 10 07:19:14 2013] User source parameters:
  Position = (277.7, 234.6) = 6 40 52.78 9 44 52.1
  Extent = 3.8 (3.0-4.5)", rotation angle = 0
  Source aperture counts = 118.0 +/- 12.5
  Background aperture counts = 14.0
  Rate = 0.003 +/- 0.0003

[Mon Jun 10 07:19:30 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 07:19:30 2013] Using photon index=1.80, rate=0.00257, arf fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src103.arf
[Mon Jun 10 07:19:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 07:19:30 2013] Updating source flux to 7.8e-14
[Mon Jun 10 07:20:10 2013] Flag c found in src. 103 procflags, skipping spectral fitting
[Mon Jun 10 07:20:27 2013] xmm0011420101/analysis//spectral/fullrun_mos1_xmm0011420101_pi300-10000_pass1_cl_src103_pl.csv not found, spectral fit skipped or did not complete