[Mon Jul  9 19:32:50 2012] Detection parameters:
  Position = (311.5, 318.1) = 5 15 41.28 1 4 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3346.8 +/- 68.4
  Background counts = 18.7
  Rate = 0.1 +/- 0.002

[Mon Jul  9 19:32:50 2012] Off-axis axis estimate = 1.71'
[Mon Jul  9 20:27:05 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 20:27:05 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Jul  9 20:27:05 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Mon Jul  9 20:27:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Jul  9 20:51:38 2012] fullrun_mos2_xmm0010620101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul  9 20:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0010620101_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 20:51:38 2012] fullrun_mos2_xmm0010620101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul  9 20:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0010620101_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 20:51:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0010620101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0010620101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 20:51:38 2012] fullrun_mos2_xmm0010620101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul  9 20:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0010620101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul  9 20:51:38 2012] fullrun_mos2_xmm0010620101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul  9 20:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0010620101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul  9 20:51:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0010620101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0010620101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 20:51:52 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.500465 pixels away
[Mon Jul  9 20:51:52 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 20:51:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 20:51:52 2012] Assessing source extent using major
[Mon Jul  9 20:51:52 2012] Source does appear to be extended
[Mon Jul  9 20:51:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 21:34:50 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 21:34:50 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Jul  9 21:34:50 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Mon Jul  9 21:34:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Mon Jul  9 21:59:15 2012] fullrun_mos2_xmm0010620101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul  9 21:59:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0010620101_pi300-10000_cl_pass1_src1.csv
[Mon Jul  9 21:59:15 2012] fullrun_mos2_xmm0010620101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul  9 21:59:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0010620101_pi300-10000_cl_pass1_src1.csv
[Mon Jul  9 21:59:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0010620101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0010620101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 21:59:15 2012] fullrun_mos2_xmm0010620101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul  9 21:59:15 2012] fullrun_mos2_xmm0010620101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul  9 21:59:15 2012] Fit fullrun_mos2_xmm0010620101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul  9 21:59:22 2012] Spatial fit model total counts = 3104.820000, observed total counts = 3011.000000
[Mon Jul  9 21:59:22 2012] Offset between fit and detection position for source 1 = 0.204895 pixels
[Mon Jul  9 21:59:22 2012] 3117.519000 total counts/ 786.249000 bgd. counts: snr = 83.140479
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.204895 pixels
  Position = (311.4, 318.2) = 5 15 41.33 1 4 40.3
  Extent = 5.3 (5.0-5.4)", rotation angle = 0
  Source counts = 2331.3 +/- 55.8
  Background counts = 786.2
  Rate = 0.08 +/- 0.002
[Mon Jul  9 21:59:22 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 21:59:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 21:59:22 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 21:59:22 2012] Source does appear to be extended
[Mon Jul  9 21:59:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 22:50:52 2012] Counts = 2331.270000, rescaling region sizes by 2.000000
[Mon Jul  9 22:50:52 2012] XMMSAS src. selection expression = ellipse(27039.653400, 27632.918400, 630.220818, 630.220818, 0.000000, X, Y)
[Mon Jul  9 22:50:52 2012] Writing source region out to fullrun_mos2_xmm0010620101_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul  9 22:50:52 2012] Extracting stamp from image fullrun_mos2_xmm0010620101_pi300-10000_cl_sm2.00.img.gz, (275, 282) - (348, 354)
[Mon Jul  9 22:50:53 2012] XMMSAS bgd. selection expression = annulus(27039.653400, 27632.918400, 2100.736060, 4201.472121, X, Y)
[Mon Jul  9 22:50:53 2012] Writing fullrun_mos2_xmm0010620101_pi300-10000_pass1_cl_src1.gif
[Mon Jul  9 22:50:55 2012] Mean detx,y = (80.87, 94.53) 
[Mon Jul  9 22:50:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 22:51:11 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 22:51:11 2012] Setting source spectrum file to fullrun_mos2_xmm0010620101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  9 22:51:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0010620101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul  9 23:09:47 2012] Updating aperture counts using extracted products
[Mon Jul  9 23:09:47 2012] Error reading totcts from fullrun_mos2_xmm0010620101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  9 23:09:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 23:09:48 2012] Using photon index=1.80, rate=0.0804, arf fullrun_mos2_xmm0010620101_pi300-10000_pass1_cl_src1.arf
[Mon Jul  9 23:09:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 23:09:48 2012] Updating source flux to 8.5e-13
[Mon Jul  9 23:10:29 2012] Reading fit data from xmm0010620101/analysis//spectral/fullrun_mos2_xmm0010620101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul  9 23:10:29 2012] Spectral fit parameter nH value = 1.82075e+19
[Mon Jul  9 23:10:29 2012] Spectral fit parameter PhoIndex value = 5.97176
[Mon Jul  9 23:10:29 2012] Failed to get F(0.3-8.0) from xmm0010620101/analysis//spectral/fullrun_mos2_xmm0010620101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul  9 23:10:29 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 23:10:29 2012] Using Nh = 1.8e+19, photon index=5.97, rate=0.0804, arf fullrun_mos2_xmm0010620101_pi300-10000_pass1_cl_src1.arf
[Mon Jul  9 23:10:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 23:10:29 2012] Updating source flux to 6.9e-13