[Mon Jul  9 19:32:29 2012] Detection parameters:
  Position = (158.7, 239.1) = 5 16 25.61 0 58 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.7 +/- 15.1
  Background counts = 10.9
  Rate = 0.005 +/- 0.0005

[Mon Jul  9 19:32:29 2012] Off-axis axis estimate = 11.01'
[Mon Jul  9 20:11:05 2012] Using EEF radius (= 11.93 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 20:11:05 2012] Initial guess for spatial extent in simple fitting = 11.93"
[Mon Jul  9 20:11:05 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.998
[Mon Jul  9 20:11:05 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.93"
[Mon Jul  9 20:27:04 2012] fullrun_mos1_xmm0010620101_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jul  9 20:27:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0010620101_pi300-10000_cl_pass0_src7.csv
[Mon Jul  9 20:27:04 2012] fullrun_mos1_xmm0010620101_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jul  9 20:27:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0010620101_pi300-10000_cl_pass0_src7.csv
[Mon Jul  9 20:27:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0010620101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0010620101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 20:27:05 2012] fullrun_mos1_xmm0010620101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jul  9 20:27:05 2012] fullrun_mos1_xmm0010620101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jul  9 20:27:05 2012] Fit fullrun_mos1_xmm0010620101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Jul  9 20:51:49 2012] Spatial fit model total counts = 229.998000, observed total counts = 230.000000
[Mon Jul  9 20:51:49 2012] Offset between fit and detection position for source 11 = 0.423962 pixels
[Mon Jul  9 20:51:49 2012] 229.915000 total counts/ 124.881000 bgd. counts: snr = 9.399002
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.423962 pixels
  Position = (158.6, 239.5) = 5 16 25.64 0 58 58.2
  Extent = 7.0 (5.4-9.3)", rotation angle = 0
  Source counts = 105.0 +/- 15.2
  Background counts = 124.9
  Rate = 0.004 +/- 0.0005
[Mon Jul  9 20:51:49 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 20:51:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 20:51:49 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 20:51:49 2012] Source does appear to be extended
[Mon Jul  9 20:51:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 21:20:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  9 21:20:03 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Mon Jul  9 21:20:03 2012] source mask rpix=1.6, npix_max = 17, mask sum = 25, frac = 1.406
[Mon Jul  9 21:20:03 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.00"
[Mon Jul  9 21:34:49 2012] fullrun_mos1_xmm0010620101_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jul  9 21:34:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0010620101_pi300-10000_cl_pass1_src7.csv
[Mon Jul  9 21:34:49 2012] fullrun_mos1_xmm0010620101_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jul  9 21:34:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0010620101_pi300-10000_cl_pass1_src7.csv
[Mon Jul  9 21:34:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0010620101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0010620101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 21:34:49 2012] fullrun_mos1_xmm0010620101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jul  9 21:34:49 2012] fullrun_mos1_xmm0010620101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jul  9 21:34:49 2012] Fit fullrun_mos1_xmm0010620101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Jul  9 21:59:20 2012] Spatial fit model total counts = 219.995000, observed total counts = 220.000000
[Mon Jul  9 21:59:20 2012] Offset between fit and detection position for source 11 = 0.084726 pixels
[Mon Jul  9 21:59:20 2012] 220.946000 total counts/ 120.275000 bgd. counts: snr = 9.179451
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.084726 pixels
  Position = (158.6, 239.5) = 5 16 25.63 0 58 57.9
  Extent = 6.7 (5.2-8.9)", rotation angle = 0
  Source counts = 100.7 +/- 14.9
  Background counts = 120.3
  Rate = 0.003 +/- 0.0005
[Mon Jul  9 21:59:20 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 21:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 21:59:20 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 21:59:20 2012] Source does appear to be extended
[Mon Jul  9 21:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 22:35:18 2012] XMMSAS src. selection expression = ellipse(13751.846200, 20785.460200, 403.377612, 403.377612, 0.000000, X, Y)
[Mon Jul  9 22:35:18 2012] Writing source region out to fullrun_mos1_xmm0010620101_pi300-10000_pass1_cl_src11_src.reg
[Mon Jul  9 22:35:18 2012] Extracting stamp from image fullrun_mos1_xmm0010620101_pi300-10000_cl_sm2.00.img.gz, (135, 216) - (182, 263)
[Mon Jul  9 22:35:18 2012] XMMSAS bgd. selection expression = annulus(13751.846200, 20785.460200, 672.296019, 1344.592039, X, Y)
[Mon Jul  9 22:35:18 2012] Writing fullrun_mos1_xmm0010620101_pi300-10000_pass1_cl_src11.gif
[Mon Jul  9 22:38:34 2012] Mean detx,y = (-6542.99, -13525.20) 
[Mon Jul  9 22:38:35 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 22:38:42 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 22:38:42 2012] Setting source spectrum file to fullrun_mos1_xmm0010620101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Jul  9 22:38:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0010620101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon Jul  9 23:09:47 2012] Updating aperture counts using extracted products
[Mon Jul  9 23:09:47 2012] Error reading totcts from fullrun_mos1_xmm0010620101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Jul  9 23:09:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 23:09:47 2012] Using photon index=1.80, rate=0.00348, arf fullrun_mos1_xmm0010620101_pi300-10000_pass1_cl_src11.arf
[Mon Jul  9 23:09:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 23:09:47 2012] Updating source flux to 1.1e-13