[Sun May 27 10:32:07 2012] Detection parameters:
  Position = (302.0, 290.1) = 22 17 48.85 -8 20 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 205.6 +/- 43.6
  Background counts = 957.8
  Rate = 0.009 +/- 0.002

[Sun May 27 10:32:07 2012] Off-axis axis estimate = 0.66'
[Sun May 27 10:42:05 2012] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Sun May 27 10:42:05 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Sun May 27 10:42:05 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949
[Sun May 27 10:42:05 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.76"
[Sun May 27 11:02:21 2012] fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_src7.ximg exists
[Sun May 27 11:02:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_src7.csv
[Sun May 27 11:02:21 2012] fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun May 27 11:02:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_src7.csv
[Sun May 27 11:02:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 11:02:21 2012] fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun May 27 11:02:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun May 27 11:02:21 2012] fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May 27 11:02:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun May 27 11:02:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0009650201_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 11:31:30 2012] Spatial fit model total counts = 9981.830000, observed total counts = 9063.000000
[Sun May 27 11:31:30 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 27 11:31:30 2012] Vigneting correction estimate = 1.000000
[Sun May 27 11:31:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 11:31:30 2012] Assessing source extent using major
[Sun May 27 11:31:30 2012] Source does appear to be extended
[Sun May 27 11:31:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 11:31:30 2012] Deleting source due to low Poisson probability 1.0